STARTECH DPPNLFM3PW 3 ft powered DisplayPort panel mount cable .5 ft 20 conductor 28 AWG 98 g

Powered DisplayPort panel mount cable

This three-foot powered DisplayPort panel mount cable provides a secure, panel-mounted DisplayPort connection for kiosks, industrial PCs or rack enclosures. It features a DisplayPort male connector on one end and a DisplayPort female panel-mount connector on the other. The cable uses all twenty conductors to deliver power when the connected device requires it. Latched connectors prevent accidental disconnection during operation.

Upgrade from loose or unpowered panel cables

The assembly replaces a standard panel-mount cable that cannot supply power or that uses an unlatched connector prone to vibration disconnects. The jump is worth it when the downstream device needs DisplayPort-sourced power or when the installation faces movement that would unseat a friction-fit plug. The .5-foot tail between the panel mount and the male plug keeps strain off the bulkhead. The CMG-rated PVC jacket meets general-purpose fire requirements for permanent installs.

Simple bulkhead installation with common pitfalls

Mount the female connector through a standard panel cut-out and secure it with the integrated flange; the male end plugs directly into the source GPU or extender. The twenty-conductor, twenty-eight AWG construction is thin enough to route through tight cable channels. What usually goes wrong: the panel cut-out is drilled too large so the flange cannot clamp, or the male connector is forced into a recessed port without the latch engaging fully.