Monoprice Inc. 140885 Flat Cat6 Network Ethernet Cable 10 ft Black 30AWG 550MHz
- Networking Patch Ca…
- 10 ft (3.05 m)
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A slim Cat6 patch cord 36% thinner than standard cable for high-density racks, with snagless RJ45 connectors and 28 AWG copper conductors
This 6-inch Cat6 UTP cable uses 28 AWG conductors and a 36% slimmer jacket than standard patch cords, terminating in snagless RJ-45 plugs with 50-micron gold contacts. It meets the ANSI/TIA-568-C.2 patch-cord specification and is built for dense rack and panel environments where space and airflow are limited.
The ultra-short length and slim profile suit patching between adjacent ports on the same switch, server or panel in a crowded cabinet. It will not reach between separate racks, across a room or to a wall outlet; installers who need longer runs or shielded construction should select a different cable.
At 6 inches (approximately 15 cm) this cord only bridges immediately adjacent RJ-45 ports. Verify that the distance between your two connection points fits within this span before ordering.
Measured against everything we stock in Ethernet & LAN Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | StarTech.com |
| Model name | N6PAT6INBKS |
| Product type | Network Ethernet Cable |
| Product color | Black |
| Connectivity | |
| Cable category | 6 |
| Ports & slots | |
| First connector | 1 x RJ-45 Male |
| Second connector | 1 x RJ-45 Male |
| Size & build | |
| Overall length | 6 in (15.2 cm) |
| Shielding | UTP |
| Shipping weight | 0.02 kg |
| Package size | 224 × 198 × 13 mm |
Any device with a standard RJ-45 jack — router, switch, patch panel, server or desktop NIC — will accept the male connectors on both ends.
Yes. The cable is 36% thinner than a regular Cat6, so it routes easily through crowded panels and improves airflow around older, thicker cords.
Check the connection status on your switch or NIC; it should show 1 Gbps full duplex, which is the rated speed for the ANSI/TIA-568-C.2 compliant cable.
More in Ethernet & LAN Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?