STARTECH PXT515191410 10 ft NEMA 5-15P to C19 14 AWG computer power cord

Server-room power cord

The STARTECH PXT515191410 is a ten-foot black cable built for rack-mounted equipment that draws power from a standard North American wall outlet. It terminates in an IEC 60320 C19 connector on the device side and a NEMA 5-15P plug on the supply side. System administrators and data-centre installers use it to feed high-draw servers, storage arrays or power distribution units without custom wiring.

14 AWG current rating

The cord uses 14 AWG conductors rated for 125 V AC at 15 A, which is the single specification that determines whether the cable can handle the connected load. Thinner gauges would overheat under sustained draw, so this rating must match or exceed the power supply input printed on the target hardware. Builders whose equipment requires a higher amperage or a different voltage cannot use this cord.

UL and RoHS compliance

The assembly carries UL certification and meets RoHS substance restrictions, confirming that the materials and construction satisfy North American safety testing and European hazardous-substance limits. These approvals do not change the electrical performance but allow the cord to be deployed in regulated environments that demand documented compliance. No additional software or adapters are included.