We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red 36in SATA cable with one straight and one right-angled connector

STARTECH

STARTECH SATA36RA1 36in Right-Angle SATA Cable

SKU CH-RD9W-HH382 MPN SATA36RA1

A 36in SATA cable with one right-angled connector for tight spaces, supporting 300 Mbytes/Sec transfer with 2.5in and 3.5in drives

  • Connector count2
  • Product typeCable Connectors
  • Product colorRed
  • Overall length36 in (91.4 cm)
  • DetailsConnector: A Straight Connector Connector: B Right Angled Co
  • Key featuresCompliant with Serial ATA II Specifications Fast data transf

Cable Length 36 in.

  • Right-angled connector fits tight drive bays and cramped cases
  • 36-inch length gives flexible routing for 3.5 and 2.5 inch drives
  • Thin cable profile reduces clutter and improves internal airflow
  • Supports up to 300 Mbytes/Sec transfer under SATA II spec
  • Dual-connector design with straight and right-angled ends for versatile installation

Right-Angle SATA Cable

The StarTech SATA36RA1 is a 36in SATA cable with one straight and one right-angled connector. It suits builders working in compact cases where a straight plug would foul a drive cage or graphics card. The red colour helps identify the cable during assembly or troubleshooting. It connects 2.5in and 3.5in SATA hard drives or SSDs to a motherboard or controller.

Thin Profile Aids Airflow

The slender cable design reduces clutter inside the chassis, allowing air to move more freely around components. Lower obstruction helps keep drive and system temperatures stable during sustained transfers. No active cooling or power draw is introduced by the cable itself. Installation is passive and adds no audible noise to the build.

Serial ATA II Compliance

The cable meets Serial ATA II specifications and supports data rates up to 300 Mbytes/Sec. This ensures reliable performance with compatible drives and host controllers. No additional software, drivers or bundled accessories are included with the cable. The right-angle end simply eases routing in tight spaces without altering signal quality.

How it compares

Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.

Price $12.99
Cheaper than about 55% of the 1,954 comparable items (median $13.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameStarTech.com
Model nameSATA36RA1
Product typeCable Connectors
Product colorRed
Ports & slots
Connector count2
Size & build
Overall length36 in (91.4 cm)
Shipping weight0.02 kg
Package size137 × 124 × 19 mm

Other versions of this model

2 more in the same range

Questions about this item

How do I connect the right-angled end of this 36in SATA cable in a tight drive bay?

Align the L-shaped connector B with the drive's SATA port so the cable exits parallel to the drive surface, then press straight in until it clicks; forcing it at an angle bends the fragile pins.

Will the thin red jacket or the connectors degrade and need replacement after extended use?

The cable is passive copper with moulded strain relief; no active components wear out, so replacement is only needed if the jacket is cut or a connector is physically damaged.

At what sustained throughput does the Serial ATA II 300 Mbytes/Sec limit become the bottleneck?

Any continuous sequential transfer that exceeds 300 Mbytes/Sec will be capped by the cable's SATA II rating, which is the first limit reached under heavy load.

More in SATA & eSATA Drive Cables

Similar items