We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black HyperX ProCast boom arm with desk clamp and microphone foam cover

SUNMON HyperX ProCast Boom Arm Stand with Mic Foam Black

SKU CH-4KBQ-0XX86

Suspension boom arm with dual springs holds a HyperX ProCast microphone steady on desks up to 4.8 cm thick and includes a foam cover and 3/8″ to 5/8″ adapter

  • Spec summaryModern, Pedestal, 26.8 in, Polished
  • Measurements14.33 in W × 12.83 in H × 9.06 in D
  • Surface finishBlack
  • Overall length18 ft (5.49 m)
  • HighlightsModern
  • Product weight0.54 kg
  • Adjust mic angle easily with flexible 26.8 inch boom arm
  • Dual suspension springs keep microphone stable and prevent unwanted noise
  • Desk clamp fits surfaces up to 1.89 inches thick with protective silicone pads
  • Includes 3/8 to 5/8 inch adapter for HyperX ProCast compatibility
  • Lightweight 0.54 kilogram design with included microphone foam cover

Perfect Fit for HyperX ProCast

This boom arm is built specifically for the HyperX ProCast microphone. Streamers and podcasters can adjust the arm to the exact angle or height they need for clear vocal capture. The package includes the arm, a table clamp and a microphone foam cover. The microphone itself is not included.

Silent Stability on Any Desk

Dual suspension springs on each arm segment hold the microphone firmly in place without sinking or rattling. Reinforced knobs lock the position once set. The clamp fits desktops up to 1.89 inches thick and uses silicone pads top and bottom to prevent scratches and slipping. The arm weighs .54 kilograms.

Ready-to-Mount Accessory Kit

A pre-installed 3/8-inch to 5/8-inch screw adapter bridges the arm to the HyperX ProCast's own mount. The bundle also supplies a foam windscreen that reduces plosives and a desk clamp with non-slip silicone spacers. No extra hardware is required beyond the microphone's supplied adapter.

How it compares

Measured against everything we stock in Audio Stands, Racks & Boom Arms, at today’s prices. Recalculated every night.

Price $19.99
Cheaper than about 70% of the 791 comparable items (median $32.99).

Specifications

Product
Brand nameAvid
Model nameHyperX ProCast Boom Arm
Part numberMPN SM M Stand35 ProCast 01
Size & build
Surface finishBlack
Overall length18 ft (5.49 m)
Measurements14.33 in W × 12.83 in H × 9.06 in D
Product weight0.54 kg

Questions about this item

How do I attach the 3/8" to 5/8" adapter to my HyperX ProCast microphone?

The adapter is pre-mounted on the boom arm; unscrew the HyperX microphone's own adapter and thread it onto the stand's adapter for a secure fit.

Will the desk clamp damage a tabletop thicker than 1.89 inches?

The clamp accepts surfaces up to 1.89 inches thick; silicone pads on both sides of the base prevent scratches and keep the stand from slipping.

At what point do the dual suspension springs lose tension during a long recording session?

Reinforced knobs lock each spring-loaded joint so the arm holds its position without sinking or shaking for the full session.

More in Audio Stands, Racks & Boom Arms

Similar items