We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small 36mm square 12V fan with 25mm mounting holes

SXDOOL

SXDOOL 4010 12V 36mm 25mm VGA Cooling

SKU CH-CK69-78Z3G

40 mm 12 V fan with 36 mm diameter and 25 mm hole spacing for graphics card cooling

  • Efficient GPU cooling with 12 V 0.14 A operation
  • Compact 36 mm diameter fits tight VGA spaces
  • 25 mm hole spacing matches standard mounting holes
  • Reliable 4010 frame design for graphics card use
  • Low power draw reduces system thermal load

SXDOOL 4010 12V VGA Cooling Fan

The SXDOOL 4010 is a 12 VDC graphics card cooling fan built around the T&T 4008M12F ND2 motor rated at 0.14 A. Its frame measures 36 mm across and uses a 25 mm hole spacing for mounting. The unit is supplied new and targets small-form-factor VGA thermal solutions.

Who This Suits and Who Should Look Elsewhere

This fan suits repair technicians or builders replacing a 36 mm, 12 V cooler with a 25 mm mounting pitch on graphics cards, north bridges, south bridges or embedded cash-register boards. It will not serve builds that need a larger frame, a different voltage or a wider mounting pitch.

Deciding Specification: 25 mm Hole Spacing

The 25 mm hole spacing is the single dimension that decides fitment. Measure the existing cooler’s mounting holes before ordering; if the pitch differs, this fan cannot be installed.

How it compares

Measured against everything we stock in GPU Fans & Heatsinks, at today’s prices. Recalculated every night.

Price $15.99
Cheaper than about 70% of the 143 comparable items (median $19.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

No published specifications for this item yet.

Questions about this item

Does my graphics card have a 25 mm hole spacing for this 4010 fan?

Measure the distance between the two mounting holes on the card's heatsink; it must match the 25 mm spacing of the 4010 frame.

Will the 4010 fan clear a northbridge heatsink on an older motherboard?

The 36 mm diameter and low profile leave enough room for most northbridge coolers, but verify the vertical clearance above your board.

How do I confirm the 12 V 0.14 A fan is spinning correctly after install?

Connect the fan to a 12 V header, power on, and watch the blades reach steady speed while listening for smooth, quiet operation.

More in GPU Fans & Heatsinks

Similar items