We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black USB to DB9 serial adapter cable 1.5m 59 inch

SXDOOL

SXDOOL USB to RS-232 Adapter DB9 1.5m 59 inch

SKU CH-4VSC-2HRWB

Converts a USB port to a DB9 serial connection with a 1.5 m cable

  • 5 m cable reaches distant serial equipment
  • USB connection powers the adapter without an external supply
  • DB9 male port fits legacy nine-pin COM devices
  • RS-232 signalling enables communication with industrial and networking gear

USB to RS-232 adapter for legacy serial devices

This USB to RS-232 adapter provides a DB9 serial port for connecting legacy equipment to modern computers. It suits engineers, technicians and hobbyists who need to configure routers, switches, industrial controllers or older scientific instruments. The 1.5 m cable length gives enough reach for bench work without excess slack.

DB9 connector with 1.5 m cable for direct connection

The nine-pin DB9 connector plugs straight into standard RS-232 ports, eliminating the need for gender changers or null-modem cables. The fixed 1.5 m length limits placement flexibility in larger racks or when equipment is farther apart. Buyers who need longer runs or multiple simultaneous serial ports should consider other solutions.

How it compares

Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.

Price $21.99
Pricier than about 63% of the 7,839 comparable items (median $14.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

No published specifications for this item yet.

Questions about this item

Will the 1.5 m USB to RS-232 adapter reach my legacy DB9 equipment without an extension cable?

The cable is 1.5 metres (59 inches) long, so measure from your USB port to the DB9 device to confirm the distance is covered.

How can I verify the RS-232 link is active after plugging in the DB9 connector?

Open Device Manager, locate the new COM port under Ports (COM & LPT), then run a terminal program to send data and watch the TX/RX LEDs blink.

More in Internal PSU & Riser Cables

Similar items