STARTECH PEXUSB3S25 2 Port PCI Express USB 3.0 Expansion Card
- 2x USB Ports
- USB 3.0
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Converts an M.2 NVMe SSD to a 2.5-inch U.2 drive with SFF-8643 cable, PCIe 3.0 and NVM Express 1.2a support
This Syba adapter converts an M.2 M-key NVMe SSD into a 2.5-inch U.2 form factor. It targets builders who want to install an M.2 drive into a system bay or backplane that only accepts SFF-8639 connectors. The card supports PCI Express 3.0 and NVM Express 1.2a specifications. Operating system compatibility covers Windows 7 through 10 64-bit with UEFI 2.3.1 or later.
The adapter passes through the full performance of the installed M.2 NVMe drive without adding latency or bandwidth limits of its own. Maximum output current is rated at 3.3 volts and 5 amps, which accommodates most consumer and client SSDs. Short-circuit and thermal-shutdown protection circuits guard the drive and host against fault conditions. Builders needing higher power delivery or enterprise-grade power-loss protection should look elsewhere.
The package includes the adapter PCB, a copper mounting nut, two M3 screws of different lengths, two washers, and a SFF-8643 to U.2 adapter cable. These parts provide everything required to secure the M.2 drive onto the board and connect the assembly to a SFF-8643 port on a motherboard or HBA. No driver disc or management software is supplied.
Measured against everything we stock in PCIe Expansion Cards, at today’s prices. Recalculated every night.
New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | SYBA |
| Model name | SI-ADA40123 |
| Product type | M.2 PCIe I/F NVMe SSD to U.2 (SFF-8639) |
| Size & build | |
| Shipping weight | 0.15 kg |
| Package size | 282 × 175 × 3 mm |
| Compatibility | |
| Supported operating systems | Windows 7/8/8.1/10 64-Bit, UEFI 2.3.1 or later |
| In the box | |
| In the box | 1 x Adapter 1 x Copper Nut 1 x M3 × 3 Screw, M3 × 5 Screw 2 x Washers 1 x SFF-8643 to U.2 Adapter Cable |
Yes, the adapter uses PCI Express Base Specification Rev 3.0, so it runs at PCIe 3.0 speeds when installed in a compatible motherboard slot.
The SSD should appear in UEFI 2.3.1 or later firmware and be recognised by Windows 7, 8, 8.1 or 10 64-Bit without additional drivers.
The box contains the adapter, a copper nut, M3x3 and M3x5 screws, two washers, and one SFF-8643 to U.2 adapter cable.
More in PCIe Expansion Cards
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?