We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with gold edge connector and two mounting brackets

Syba

Syba SI-ADA50067 M.2 & mSATA to SATA expansion card

SKU CH-GGTK-TTQFR MPN SI-ADA50067

Connects M.2 or mSATA SSDs to a SATA port at 6.0 Gbps with standard and low-profile brackets

  • Transfer speed6.0 Gbit/s
  • Key featuresM.2 Specification revision 0.9 Serial ATA Specification revi
  • Product dimensions1.5 in × 5.5 in × 7 in (H × W × L)
  • Product weight1
  • In the box1 x M.2 and mSATA to SATA III Adapter 1 x User Manual 1 x Lo
  • Connect M.2 or mSATA SSDs to a standard SATA port
  • Achieve 6.0 Gbps data transfer with SATA 3.2 support
  • Fit 22 mm wide M.2 cards in 30, 42 or 60 mm lengths
  • Includes low-profile bracket for small-form-factor builds
  • Supports M.2 B-key modules for broad SSD compatibility

M.2 and mSATA to SATA III adapter

The Syba SI-ADA50067 connects an M.2 (NGFF) or mSATA solid-state drive to a standard SATA interface. It supports M.2 B-key cards in 22*30, 22*42 and 22*60 sizes as well as mSATA SSDs measuring 26.8*30 and 50.95*30. The card operates at SATA revision 3.2 with a 6.0 Gbps data transfer rate. Both standard and low-profile brackets are included for different chassis types.

Builders adding SATA-based M.2 or mSATA storage

This adapter suits builders who want to install a SATA-protocol M.2 or mSATA SSD in a system with a free SATA port. It also supports system boot from the attached drive. Buyers who need to install a PCIe-based M.2 drive cannot use this adapter because it operates only over the SATA protocol. Systems without an available SATA connector or without space for a full-height or low-profile expansion card should look at other solutions.

SATA revision 3.2 at 6.0 Gbps

The single specification that decides compatibility is the SATA revision 3.2 interface running at 6.0 Gbps. Only M.2 B-key or mSATA drives that communicate over the SATA protocol will function; PCIe-based M.2 modules are not supported. Verify that the drive uses the SATA protocol and matches the listed physical dimensions before purchase.

How it compares

Measured against everything we stock in PCIe Expansion Cards, at today’s prices. Recalculated every night.

Price $19.99
Cheaper than about 70% of the 891 comparable items (median $30.99).

New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameSYBA
Model nameSI-ADA50067
Performance
Transfer speed6.0 Gbit/s
Size & build
Product dimensions1.5 in × 5.5 in × 7 in (H × W × L)
Shipping weight0.09 kg
Package size178 × 140 × 41 mm
In the box
In the box1 x M.2 and mSATA to SATA III Adapter
1 x User Manual
1 x Low Profile Bracket
1 x Bag of screws and washers

Questions about this item

Does my motherboard need a free SATA port and cable for this adapter?

Yes, the card converts an M.2 or mSATA SSD to a standard SATA III connection running at 6.0 Gbps, so an available SATA port and data cable are required.

Can I keep using an older SATA II drive on the same controller while this card runs at SATA III speed?

The adapter operates at SATA revision 3.2 with a 6.0 Gbps transfer rate, and SATA is backward compatible, so legacy SATA II devices will continue to work on the same controller.

How do I confirm the M.2 SSD is recognised after installing it on the SI-ADA50067?

After securing the M.2 drive (22*30, 22*42 or 22*60) with the supplied screws, the SSD should appear in BIOS and the operating system as a normal SATA storage device.

More in PCIe Expansion Cards

Similar items