We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow 25-foot marine power cordset with molded watertight plugs and LED indicator

TAURKENAM

TAURKENAM 199117 30A 125V 25ft Yellow power adapter

SKU CH-SA0D-RXFDJ

A 25-foot yellow marine cordset rated 30 amps at 125 volts with watertight moulded ends, nickel-plated contacts, a contour grip, Easy Lock system and built-in power indicator light

  • Watertight molded plug and nickel-plated contacts resist corrosion for safe marine power connections
  • Easy Lock system secures cordset to inlet with a quick 1/8-turn locking action
  • Molded-in LED indicator glows red to confirm power is reaching the boat
  • Contour grip with thumbnail locator aligns blades at 12 o'clock for easy, blind-mate connection
  • Heavy-duty 10-gauge marine-grade cable stays flexible in cold conditions for reliable 30-amp service

Marine shore-power cordset

This 30 A 125 V cordset delivers 25 ft of heavy-duty 10-gauge marine-grade cable for connecting a boat to shore power. The watertight moulded plug and connector use nickel-plated contacts that resist corrosion in salt-spray environments. A built-in LED on the boatside connector glows red when live voltage is present. The Easy Lock system secures the cord to any compatible Marinco inlet with a quick one-eighth turn.

Thermals and power handling

The 10-gauge conductors are rated for continuous 30 A service at 125 V, keeping voltage drop low over the full 25 ft run. Marine-grade insulation remains flexible in cold temperatures and resists oil, UV and abrasion without overheating. No active cooling is required; the cable dissipates heat passively through its jacket during normal operation.

Replaces worn or undersized shore cords

This cordset replaces damaged, cracked or lower-gauge shore-power cables that can no longer carry 30 A safely. The upgrade is worth it when the existing cord shows insulation breakdown, corroded blades or a loose inlet fit that causes arcing. Boats needing 50 A service or a different inlet standard cannot use this 30 A model.

How it compares

Measured against everything we stock in AC Adapters & Power Bricks, at today’s prices. Recalculated every night.

Price $178.99
Pricier than about 90% of the 3,875 comparable items (median $23.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

No published specifications for this item yet.

Questions about this item

How do I connect the 30A 125V cordset to a Marinco inlet using the Easy Lock system?

Align the thumbprint at 12 o'clock so the blades match the inlet, push the connector in, then rotate it one-eighth of a turn until the locking tabs engage the inlet slots.

What part of the cordset will need replacement first if the LED power indicator stops glowing red?

The molded-in LED is integral to the boatside connector; if it fails the whole connector end must be replaced because the light cannot be serviced separately.

Which conductor gauge limits continuous current on the 25-foot yellow cordset rated for 30 amps?

The 10-gauge marine-grade cable is the limiting factor; it is sized for the 30A rating, so sustained loads above 30 amps will hit the cable's ampacity first.

More in AC Adapters & Power Bricks

Similar items