We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two black metal vented 1U cantilever rack shelves with flip mounting ears

TAURKENAM

TAURKENAM 2 PCS 12in 1U Vented Cantilever Rack Shelves

SKU CH-VT9H-AYAM8

Two 1U vented cantilever shelves, 19 inches wide by 12 inches deep, with flip lips and welded corners for 19-inch racks

  • Vented design speeds heat dissipation for cooler equipment
  • Welded corner joints resist loads and deformation
  • Flip lips install up or down for flexible device fit
  • Two shelves plus screws and cage nuts included
  • Fits 19 inch racks with 12 inch depth

12-inch 1U vented cantilever rack shelves

This pair of 1U shelves mounts in standard 19-inch racks and cabinets. Each tray measures 12 deep by 1.7 high and uses a vented steel surface to promote airflow around installed equipment. The set suits network hardware, audio gear and similar IT devices that need open-air cooling in a compact footprint.

Detachable flip-lip ears for two mounting

Mounting ears ship detached to avoid transit damage and bolt onto the shelf with either the lip facing up or down. Lips up creates a raised edge that helps keep shallow devices from sliding forward. Lips down clears the front face for deeper chassis that would otherwise contact the lip. Pre-drilled cable tie holes are provided for basic cable management.

Verify 19-inch rack spacing

Confirm the rack provides standard 19-inch wide mounting holes and at least 12 inches of clear depth between front and rear rails. The 1U height occupies a single rack unit so ensure vertical space is available. No additional hardware beyond the included screws and cage nuts is required for installation.

How it compares

Measured against everything we stock in Rack Cabinets & Shelves, at today’s prices. Recalculated every night.

Price $81.99
Cheaper than about 57% of the 2,764 comparable items (median $106.99).

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

No published specifications for this item yet.

Questions about this item

How can I verify the 1U 12in shelf is seated correctly in my 19in rack?

The shelf mounts on standard 19in posts; when the detachable ears are bolted flush and the vented tray sits level, the 1.7in height confirms a proper 1U fit.

What ships with the two shelves and what must I source separately?

The box contains two 12in vented cantilever trays plus mounting screws and cage nuts; no extra hardware is required for a standard 19in rack.

Which depth should I pick among the 6, 8, 10 and 12in options?

Choose the 12in depth when your equipment needs the full 12in of usable tray space; select 6, 8 or 10in for shallower devices to save rack depth.

More in Rack Cabinets & Shelves

Similar items