TAURKENAM 22AWG UL2464 3-Conductor Power Cable 25ft
Three-conductor 22 AWG cable rated 300 V and 80 °C with tinned copper conductors and a 4.7 mm PVC jacket, 25 ft long
- 300 V rating supports LED lighting circuits
- 80 °C temperature rating handles warm environments
- 7 mm jacket diameter fits standard cable glands
- 22 AWG tinned copper conductors resist corrosion
- 25 ft length reaches distant power points
TAURKENAM 22AWG UL2464 3-Conductor Power Cable 25ft
This 25-foot power cable uses 22 AWG tinned stranded copper conductors with PVC insulation and a flexible flame-retardant PVC jacket. It carries three colour-coded wires in red, yellow and black for easy identification. The round 4.7 mm jacket seals reliably into standard cable glands. It is rated for 300 V and 80 °C operating temperature.
Suits low-voltage LED, lighting and internal wiring
Ideal for LED light strips, street lights, indoor lighting, automotive lighting and internal equipment wiring where a 300 V, 80 °C rated cable is specified. The three-conductor layout supports simple power and control circuits. Not for mains-voltage installations, high-current feeds or applications requiring a grounding conductor or higher temperature rating.
300 V, 80 °C rating decides fit
The 300-volt and 80 °C limits are the key figures that determine whether this cable matches your design requirements. Verify that your circuit voltage and ambient temperature stay within these values before use. The 22 AWG conductor size and 4.7 mm overall diameter follow from this rating.
How it compares
Measured against everything we stock in AC Adapters & Power Bricks, at today’s prices. Recalculated every night.
- Price $25.99
- Typical for this category: the median of 3,875 items is $23.99.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
What voltage rating must the power supply or LED driver provide to match this 300V-rated cable?
The cable is rated for 300V, so the connected power supply or LED driver must not exceed that voltage to stay within the cable's specification.
Will the 4.7 mm jacket diameter fit through the standard cable gland I already use for 22 AWG wiring?
The 4.7 mm jacket is designed to seal well in standard cord glands and cable grips commonly used with 22 AWG round cables.
How can I verify the three conductors are correctly identified after wiring the red, yellow and black leads?
Each conductor is colour-coded — red, yellow and black — so a visual check or continuity test against those colours confirms correct connections.
More in AC Adapters & Power Bricks
