TAURKENAM 3 Way Junction Box IP68 2 Pin Power Adapter
A three-way IP68 junction box joins two-pin cables from 4.5 to 10 mm, rated 400 V and 13 A from -40 to 95 °C
- IP68 waterproof rating protects against dust and water immersion
- PA66 housing withstands -40 to 95 °C operating range
- Tool-free plug-and-play installation requires no soldering
- Supports 400 V at 13 A for low DC and high AC power
- Accepts cable diameters from 4.5 to 10 mm
Three-way junction box for outdoor power connections
The TAURKENAM three-way junction box accepts two-pin cables from 4.5 mm to 10 mm diameter. It is rated for 400 V and 13 A, making it suitable for low-voltage DC and mains AC circuits. The IP68 enclosure protects connections in buried or exposed outdoor installations.
PA66 housing with rubber seals for environmental
The body uses PA66 material rated from -40 °C to 95 °C for high-temperature resistance and hardness. Four rubber rings and clamping nuts create a double seal that blocks moisture and dust. No soldering is required; cables terminate directly into the connector for plug-and-play installation.
Sealed three-way split for permanent outdoor runs
The box provides a single-input, two-output layout for branching power to lighting, signage or equipment. It is not designed for applications that need more than two output branches or for cables outside the 4.5 mm to 10 mm range. The fixed three-way format limits reconfiguration once the enclosure is closed.
How it compares
Measured against everything we stock in AC Adapters & Power Bricks, at today’s prices. Recalculated every night.
- Price $26.99
- Pricier than about 56% of the 3,875 comparable items (median $23.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
How do I install the TAURKENAM 3 way junction box and which step is often missed?
Strip each 2 core cable to the correct length, insert through the clamping nut and rubber ring matching the 4.5-10 mm diameter, then tighten the nut firmly to compress the ring for IP68 sealing; the step most often missed is fully tightening the nut to engage all four rubber rings.
What maintenance or replacement will the TAURKENAM IP68 junction box need over time?
Inspect the PA66 housing and four rubber sealing rings periodically for cracks or hardening caused by the -40 to 95 °C temperature range; replace any degraded rings or the whole box if the clamping nuts no longer hold the 4.5-10 mm cables securely.
What is the first limit reached when the TAURKENAM 2 pin adapter runs continuously at high load?
The 13 A rated current limit will be reached before the 400 V voltage rating, so sustained loads above 13 A will overheat the connector first.
More in AC Adapters & Power Bricks
Similar items
No Sew 19V 3.42A 65W power adapter 5.5mm x 2.5mm 10-in-1 connectors
- USB C Charger
- 9 V





