TAURKENAM 4 Pin 24AWG IP65 Extension Cable 9.84ft
Extends single-colour LED strips with a 9.84 ft IP65-rated 4-pin 24 AWG cable featuring male and female connectors
- IP65 rating protects against dust and water ingress
- 84ft length extends LED strip runs without voltage drop
- Male and female 4-pin connectors enable quick plug-and-play installation
- 24AWG copper conductors carry current reliably for single-colour strips
- PVC jacket resists abrasion in automotive and marine environments
IP65 Extension Cable for LED Strips
This 9.84ft 24AWG cable carries power to single-colour LED strips through a male and female 4-pin connector pair rated IP65. The PVC and copper construction is designed for indoor and outdoor use on motorcycles, cars, trucks and boats. It connects directly to compatible 5050, 3580, 5630, 5730, 3014, FCOB, COB and FOB strip types.
Suits Installers Needing Weather-Sealed Runs
Builders extending low-voltage LED lighting in damp or exposed locations will find the IP65 rating and locking 4-pin format convenient. The cable can be cut to length and re-terminated, so custom runs are straightforward. Buyers who need a different pin count, a higher current rating or connectors that mate with non-BTF-LIGHTING gear should look elsewhere.
Handles Typical Single-Colour Strip Loads
The 24AWG conductors and 4-pin layout comfortably serve standard single-colour 5050, 5630, 5730, 3014, 3580, FCOB, COB and FOB strips at their usual voltages. Voltage drop becomes noticeable on very long runs or when driving multiple high-density reels from one feed, so plan power injection points accordingly.
How it compares
Measured against everything we stock in AC Adapters & Power Bricks, at today’s prices. Recalculated every night.
- Price $32.99
- Pricier than about 66% of the 3,875 comparable items (median $23.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
What connector type must my LED strip already have to mate with the 4-pin male and female ends on this cable?
The cable uses 4-pin connectors at both ends, so your strip must present a matching 4-pin interface for a direct fit.
Can I use this IP65-rated extension with my existing 2-pin single-colour strips such as 5050 or 5630 types?
The wire is 4-pin 24AWG, while 2-pin strips only carry two conductors; you would need a compatible 4-pin to 2-pin adapter or a strip that already uses a 4-pin connector.
How can I verify the IP65 seal is intact after I plug the male and female connectors together?
When fully mated the connectors lock with a positive click and the rubber gasket sits flush, giving a visible seal that meets the IP65 rating.
More in AC Adapters & Power Bricks
