TAURKENAM 5050 4Pin LED Strip Connector Kit power adapter
Solderless kit connects 10 mm 5050 and 3528 RGB strips with 10 corner, 10 gapless, 2 T-shape and 10 male-to-male plugs plus clips and extension cable
- Tool-free snap installation — no soldering or cutting required
- Complete kit with splitters, corners, T-shapes and gapless connectors
- Flame-retardant PVC and tin-plated copper for durable connections
- Rated for 0–4 A current and 0–24 V voltage input
- Fits 10 mm 4-pin 5050 and 3528 RGB LED strips
Kit Contents
The TAURKENAM 5050 4Pin LED Strip Connector Kit supplies every piece needed to join, split and extend 10mm RGB strips without soldering. It includes a two-way splitter cable, two controller connectors, ten strip-to-strip wired connectors, ten corner connectors, two T-shape connectors, ten gapless connectors, twenty mounting clips, ten male-to-male connectors and one extension wire. The assortment suits DIY lighting projects of any layout.
Electrical Ratings
Connectors are built from flame-retardant PVC and tin-plated copper rated for continuous currents up to 4A and voltages up to 24V. The materials withstand operating temperatures from minus twenty to one hundred degrees Celsius. No active cooling or power circuitry is present, so the kit adds no noise or heat of its own during normal use.
Compatibility Limits
The kit fits 10mm wide 4-pin 5050 and 3528 RGB strips only; it will not work with 5-pin RGBW, addressable or wider strips. Buyers who need waterproof IP-rated joints, higher current capacity or compatibility with other strip widths must choose a different connector system.
How it compares
Measured against everything we stock in AC Adapters & Power Bricks, at today’s prices. Recalculated every night.
- Price $25.99
- Typical for this category: the median of 3,875 items is $23.99.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
How do I connect the 10mm 5050 RGB strip to the gapless connector without soldering?
Open the clip, slide the 10mm 5050 strip under the metal contacts so the copper pads sit flat, then snap the clip shut; the tin-plated copper teeth pierce the pads for a tool-free connection.
Which parts of the kit wear out first and need replacing?
The flame-retardant PVC housings and tin-plated copper contacts are rated for -20 °C to 100 °C; only the 20 mounting clips may become brittle after prolonged heat exposure and need swapping.
At what current does the 4-pin connector hit its thermal limit during a long run?
The kit supports 0-4 A and 0-24 V; sustained loads near 4 A will reach the 100 °C heat-resistance ceiling first, so keep continuous current below that level.
More in AC Adapters & Power Bricks
