TAURKENAM Extension Cord 9 ft 3 Outlets On/Off Switch ETL 2 Pack power adapter
A 9-foot extension cord adds three grounded outlets with a foot-operated on/off switch, rated 16 AWG for 500 W incandescent loads and ETL listed
- ETL listed safety standard protects connected devices
- 9 ft cord extends power to distant outlets
- Three outlets multiply a single wall socket
- Foot-operated on/off switch controls lamps hands-free
- 16 AWG SPT-2 cable rated for 500 W incandescent loads
Two-pack extension for lamps and décor
This two-pack supplies two 9-foot extension cords that turn a single wall outlet into three grounded sockets. Each cord is built with 16 AWG SPT-2 conductors and a reinforced plug that resists bent prongs. The integrated on/off switch lets you cut power to all three outlets with a foot tap.
Switch and covers change daily use
The built-in switch removes the need to unplug holiday strings or desk lamps every night. Safety outlet covers shield unused sockets from dust and accidental contact. Both features are moulded into the cord body, so nothing extra ships in the box and nothing requires setup.
Check load type and indoor rating
The cord is rated for 500 W resistive load and marked for incandescent lamp loads only. Do not use it for heaters, motors or any inductive appliance. It carries an ETL listing for indoor use, so keep it away from moisture and outdoor installations.
How it compares
Measured against everything we stock in AC Adapters & Power Bricks, at today’s prices. Recalculated every night.
- Price $31.99
- Pricier than about 64% of the 3,875 comparable items (median $23.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
How often should I inspect the AWG 16 cord for wear before replacing it?
Check the cord before each season; replace it if the insulation is cracked, the plug blades are bent, or the safety covers no longer close.
What is the maximum continuous load the 3-outlet strip can handle without tripping?
The resistive rating is 500 W at 250 V, so the total draw of all connected lamps must stay at or below 500 W.
Does the on/off switch or the cord get warm when the strip runs at 500 W all day?
At the rated 500 W load the cord and switch may become warm to the touch; keep the strip uncovered and away from flammable materials.
More in AC Adapters & Power Bricks





