TAURKENAM SAE Extension Cable 16 AWG 12V-24V DC with ON/Off Switch 30cm
A 30 cm SAE-to-SAE extension cable with an inline on/off switch for 12-24 V DC power connections
- 16 AWG copper core handles 12-24 V DC reliably
- Built-in switch lets you break the circuit without unplugging
- Standard SAE connectors mate with most solar and battery gear
- 30 cm length keeps wiring tidy on motorcycles and trailers
- Rated 600 V and 105 °C for tough outdoor use
SAE Extension Cable with Integrated Switch
This 30 cm SAE extension cable adds a convenient on/off switch to 12 V to 24 V DC circuits. It is designed for motorcycle, RV, ATV, lawnmower, trolling motor, tractor sprayer and solar panel installations where frequent plugging and unplugging is impractical.
16 AWG Copper Conductor Rated to 600 V
The UL1015 16 AWG two-core wire uses 100 % copper with a 3.15 mm diameter and a 105 degree Celsius temperature rating. It comfortably handles typical automotive and solar charging currents, while the 600 V insulation provides ample headroom for 12 V to 24 V systems.
Snap-Action SAE Connectors and 10 cm Switch Lead
Standard two-pin SAE plugs mate with most brands of SAE outlets for quick connect and disconnect. The switch sits 10 cm from one connector, allowing power isolation without removing the cable, which reduces wear on the contacts during daily use.
How it compares
Measured against everything we stock in AC Adapters & Power Bricks, at today’s prices. Recalculated every night.
- Price $20.99
- Cheaper than about 56% of the 3,875 comparable items (median $23.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
Will the 16 AWG cable and SAE connectors handle the same 12 V to 24 V DC loads my existing motorcycle battery tender uses?
The cable is rated for 12 V to 24 V DC with UL1015 16 AWG conductors at 600 V and 105 °C, so it matches typical SAE battery-tender circuits.
How can I confirm the inline switch is operating correctly once installed?
Toggle the switch 10 cm from the SAE end; the circuit opens and closes instantly, letting you verify power flow without unplugging the connector.
Does the 30 cm pack include both male and female SAE ends, or do I need a second cable for a complete run?
The single 30 cm harness has a standard SAE plug on each end, giving one male and one female connection ready to use.
More in AC Adapters & Power Bricks
Similar items
Dell YCZX-1203000U 12V 3A 36W Power Adapter 5.5mm 2.1mm 2.5mm
- USB C Charger
- 9 V





