TAURKENAM Y-Shape 2-Pin IP68 Waterproof Power Adapter 16AWG 27cm
IP68-rated Y-splitter joins one male to two female 2-pin connectors on 16AWG cable, 27 cm total with 13.5 cm branches, for waterproof LED lighting on vehicles and boats
- IP68 waterproof rating protects connections in wet environments
- Y-shape splitter powers two LED strips from one source
- 16 AWG pure copper conductors ensure reliable current flow
- 27 cm total length with 13.5 cm branches fits tight spaces
- Metal locking nuts prevent accidental disconnection during vibration
Y-Shape 2-Pin Waterproof Power Adapter
The TAURKENAM adapter is a new IP68-rated Y-splitter built with 16AWG pure-copper pigtails and metal-threaded nuts. It provides one male input that divides into two female outputs, plus two extra male and one extra female 10 cm leads for flexible wiring.
Installers needing a single-to-dual waterproof
The kit suits anyone extending or branching 2-pin LED lighting on motorcycles, cars, trucks, boats or indoor and outdoor strips. Builders who require more than two branches, a different pin count, or a non-waterproof connection should look at other solutions.
IP68 rating with 16AWG conductors
The connectors meet the IP68 ingress-protection standard and use 16AWG wire across a 27 cm total length with 13.5 cm per branch, making the waterproof seal and conductor gauge the key spec for deciding fit.
How it compares
Measured against everything we stock in AC Adapters & Power Bricks, at today’s prices. Recalculated every night.
- Price $27.99
- Pricier than about 58% of the 3,875 comparable items (median $23.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
What wire gauge and total cable length do I need to plan for when routing the Y-splitter?
The adapter uses 16AWG pure copper pigtails and measures 27cm end-to-end, with each branch extending 13.5cm from the split point.
How do I achieve the IP68 seal when connecting the male and female threads?
Hand-tighten the metal coupling nuts until the O-rings compress fully; the most common mistake is leaving a visible gap because the nut was only finger-tight.
When should I inspect or replace the supplied 10cm pigtail leads?
Check the 10cm leads at each seasonal change for cracked insulation, corroded pins or loose crimps; replace any lead that shows green oxidation or brittle wire.
More in AC Adapters & Power Bricks
