TeKit 5 Pin Motherboard Header to USB 2.0 Female Adapter Cable 2 Pack 20cm
- 7.87 in (20 cm)
- Cable Connectors
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Connects a 5-pin motherboard header to a Micro-USB 2.0 male plug, 0.5 m each, two cables supplied
Cable Length 1.64 Feet
This two-pack converts an internal 5-pin motherboard header into an external Micro-USB 2.0 Type-A male port. Each cable measures 0.5 m, giving enough reach for front-panel or bracket mounting. The pair suits builders adding a USB connection to a chassis without a native header. DIY enthusiasts extending internal USB devices will find the pinout convenient.
The black cables use a standard 0.1 in pitch 5-pin female header that plugs straight onto the motherboard. A Micro-USB 2.0 male plug on the other end accepts common peripherals or flash drives. Dupont-style terminals keep the connection secure inside the case. The 1.64 ft length avoids cable clutter while reaching most front-panel cutouts. Buyers needing a right-angle Micro-USB plug or a longer run should look elsewhere.
The adapter supports both USB 1.1 standard and USB 2.0 high-speed signalling through the same header. No driver installation is required; the operating system detects the port normally. Data and power lines pass through the 5-pin connector without active circuitry. Systems that demand USB 3.0 or 3.1 throughput cannot use this link.
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Tekit |
| Product type | Cable Connectors |
| Product color | Black |
| Ports & slots | |
| First connector | 5 Pin Motherboard Female |
| Second connector | Micro-USB 2.0 A MALE |
| Connector count | 2 |
| Connector details | 5 Pin Motherboard Female Header to Micro-USB 2.0 Male Adapter Dupont Extender Cable, Micro USB 2.0A male plug to 1x 5Pin Female 0.1 in USB header PCB motherboard cable |
| Connector gender | Male to Female |
| Size & build | |
| Overall length | 1.6 ft/0.5m |
| Cable length | 1.64 ft (0.5m) |
Other versions of this model
The adapter is compatible with USB 1.1 and USB 2.0 high-speed, so real-world throughput is limited to the 2.0 specification.
The header has a 2.54 mm pitch, matching the standard 0.1 inch spacing found on most motherboard USB headers.
Plug the Micro-USB 2.0 male end into the device, then press the 5-pin female header onto the motherboard pins, ensuring the keyed pin alignment matches the header notch.
More in Internal PSU & Riser Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?