We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black Y-splitter cable with straight C8 plug and two 90-degree C7 sockets, 1ft PVC jacket

TeKit

TeKit IEC C8 to 2×C7 90° Y Splitter 1ft 18AWG 10A 125V

SKU CH-6JZ0-HJNXT

Splits one IEC C8 inlet into two right-angled C7 outlets using a 1 ft 18 AWG cable rated 10 A 125 V

  • Connector count2
  • Connector detailsIEC 60320 C8 Plug to C7 Receptacle Male to Female Extension
  • Connector genderMale to Female
  • Conductor typeCopper Conductor
  • Product typeIEC 60320 C8 Plug to C7 Receptacle Male to Female Extension
  • Product colorBlack

Style C8 to Dual Elbow C7 Splitter

  • Connect two devices from one C8 inlet with the Y-split design
  • 90-degree angled C7 plugs save space behind equipment
  • 18 AWG copper conductors rated for 10 A at 125 V
  • Built-in strain relief at the Y-junction protects the cable
  • 1 ft length keeps the setup tidy and flexible

IEC C8 to Dual C7 Splitter

The TeKit IEC C8 to 2×C7 90° Y Splitter is a new one-foot power adapter cord that converts a single IEC 60320 C8 male plug into two IEC 60320 C7 female receptacles. It uses 18AWG copper conductors with a moulded PVC jacket and built-in strain relief for durable everyday use. The 90-degree angled C7 connectors keep the cable close to the device, helping to maintain a tidy desk or entertainment area.

Builders needing two Figure-8 ports from one inlet

This splitter suits anyone powering two devices that use standard non-polarised C7 cords from a single C8 inlet on a TV, monitor, audio unit or small appliance. The short 30 cm length works best when both devices sit close to the source inlet. Installations that require a longer reach, a straight C7 connector orientation, or more than two C7 outputs will need a different cable solution.

10 A 125 V / 2.5 A 250 V rating

The cable is rated for 10 A at 125 V for North American use and 2.5 A at 250 V for European markets, so the combined draw of both connected devices must stay within these limits. The 18AWG SPT-2 copper conductors and IEC 60320 compliant moulded connectors deliver safe power splitting for typical low-power electronics.

How it compares

Measured against everything we stock in Jumper & Adapter Power Cords, at today’s prices. Recalculated every night.

Price $9.99
Cheaper than about 85% of the 402 comparable items (median $13.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameTekit
Product typeIEC 60320 C8 Plug to C7 Receptacle Male to Female Extension Power Supply Main Adapter Cable
Product colorBlack
Ports & slots
Connector count2
Connector detailsIEC 60320 C8 Plug to C7 Receptacle Male to Female Extension Power Supply Main Adapter Cable
Connector genderMale to Female
Size & build
Overall length1 ft (0.3 m)
Cable shieldingYes
Conductor typeCopper Conductor

Other versions of this model

5 more in the same range

Questions about this item

Should I choose the 1-foot or 30-centimetre length for a tight desk setup?

They are the same cable — 1 foot equals 30 cm — so either description points to the single length available.

What does the 10 A 125 V rating mean when I plug two devices into the splitter?

The combined draw of both connected devices must stay at or below 10 amps at 125 volts; the 2.5 A 250 V rating applies on European supplies.

How does the IEC 60320 C8 to dual C7 interface limit what I can connect?

The male C8 plug fits a figure-8 inlet on the source device, while each 90-degree C7 female port accepts a standard non-polarised figure-8 power cord.

More in Jumper & Adapter Power Cords

Similar items