We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black IEC C8 male to C7 female extension cable, 1 foot long

TeKit

TeKit IEC 60320 C8 to C7 Extension Cord 1 Foot 18AWG

SKU CH-5GWH-WGT0P

A 30 cm IEC 60320 C8 to C7 extension cord rated 10 A at 125 V AC or 2.5 A at 250 V AC for tight spaces

  • Connector count2
  • Connector detailsIEC 60320 C8 Plug to C7 Receptacle Male to Female Extension
  • Connector genderMale to Female
  • Conductor typeCopper Conductor
  • Product typeIEC 60320 C8 Plug to C7 Receptacle Male to Female Extension
  • Product colorBlack

Style 1ft cord

  • Extends power reach in tight spaces with a 30 cm cable
  • Connects IEC 60320 C8 plugs to C7 receptacles for broad hardware compatibility
  • Rated 10 A at 125 V AC and 2.5 A at 250 V AC for safe operation
  • Copper conductors with shielding ensure reliable power transmission
  • Male-to-female plug-and-play design requires no tools or expertise

IEC C8 to C7 Extension Cord

This one-foot black cord extends the reach of devices that use an IEC 60320 C8 inlet by providing a C7 receptacle on the opposite end. It is built for computer hardware setups where the stock power cable falls short of the outlet or power strip. The 18 AWG copper conductors are shielded and rated for 10 A at 125 V AC or 2.5 A at 250 V AC. Buyers who need a longer run or a different connector pairing should look elsewhere.

Plug-and-Play Installation

The male C8 plug inserts into the device inlet while the female C7 receptacle accepts the existing power cord, requiring no tools or configuration. Shielded construction and a snug terminal fit reduce the chance of intermittent contact in tight routing channels. The short 30 cm length limits slack, so installers must ensure both connectors sit without strain. It is not suited for permanent in-wall runs or outdoor exposure.

C7 Connector Current Limits

The C7 receptacle caps continuous draw at 2.5 A, so equipment demanding higher current at 250 V will exceed the connector rating even though the cable conductors handle 10 A at 125 V. Voltage drop over the one-foot span is negligible for typical loads, but daisy-chaining multiple cords adds resistance and mechanical stress. The assembly carries no data signals and cannot convert between IEC and regional mains plugs.

How it compares

Measured against everything we stock in Jumper & Adapter Power Cords, at today’s prices. Recalculated every night.

Price $4.99
Cheaper than about 96% of the 402 comparable items (median $13.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameTekit
Product typeIEC 60320 C8 Plug to C7 Receptacle Male to Female Extension Power Supply Main Adapter Cable
Product colorBlack
Ports & slots
Connector count2
Connector detailsIEC 60320 C8 Plug to C7 Receptacle Male to Female Extension Power Supply Main Adapter Cable
Connector genderMale to Female
Size & build
Overall length1 ft (0.3 m)
Cable shieldingYes
Conductor typeCopper Conductor

Other versions of this model

5 more in the same range

Questions about this item

How can I verify the extension cord is delivering power correctly after connecting it?

The cord is rated for 10A at 125V AC or 2.5A at 250V AC; if your device powers on and operates normally without overheating at the connectors, the extension is working as intended.

What comes in the box and do I need any extra parts to use this cord?

The package contains the 1 foot IEC 60320 C8 male to C7 female extension cable only; you will need an existing C7 power cord and a C8 inlet on your device to complete the connection.

Which version should I choose if my equipment uses a C8 inlet and a C7 plug?

This single 1 foot, 18AWG copper conductor model with shielding is the only version listed and matches C8 to C7 requirements directly.

More in Jumper & Adapter Power Cords

Similar items