We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Short black power cable with two-prong US plug and C13 kettle connector

TeKit

TeKit NEMA 1-15P to C13 Short Power Cord 50cm

SKU CH-VFV5-NPQ5T

Short 50 cm cord connects a NEMA 1-15P plug to a C13 inlet for monitors or chargers, rated 10 A at 250 V with PSE/JET certified copper conductors

  • Connector count2
  • Connector detailsNEMA 1-15P to IEC C13 Short Cable Cord,IEC 320 C13 Kettle to
  • Connector genderMale to Female
  • Cable shieldingDouble-shielded
  • Conductor typeCopper Conductor
  • Product typeCable Connectors

Size 5ft

  • Short 50 cm length reduces cable clutter behind desks
  • NEMA 1-15P to IEC C13 fits monitors and chargers
  • 10 A 250 V rating handles typical PC power loads
  • 18 AWG copper conductor with double shielding ensures reliable delivery
  • PSE/JET certified for verified safety compliance

TeKit NEMA 1-15P to C13 Power Cord

The TeKit NEMA 1-15P to C13 cord connects monitors, chargers and other computer hardware to JP or US wall outlets. A NEMA 1-15P two-pin male plug on one end mates with an IEC 320 C13 female connector on the other. The cable is rated for 10A at 250V and uses an 18AWG copper conductor. It is sold new as a single unit.

Thermals, Noise and Power Draw

As a passive cable assembly the cord generates no noise and adds no measurable heat to the system. The 18AWG copper conductor handles the rated 10A 250V load without voltage drop that would stress connected equipment. Double shielding protects the power path from external interference in typical office or home environments.

Upgrade and Replacement Context

This 50cm lead replaces longer factory cables that create clutter behind desks or in rack cabinets. It suits builders who need a short reach between a power strip and a C13 inlet but is not for users who require a longer run or an earthed three-pin plug. The PSE/JET certified construction makes the jump worthwhile when safety compliance and tidy cable management are priorities.

How it compares

Measured against everything we stock in Jumper & Adapter Power Cords, at today’s prices. Recalculated every night.

Price $8.99
Cheaper than about 90% of the 402 comparable items (median $13.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameTekit
Product typeCable Connectors
Product colorBlack
Ports & slots
Connector count2
Connector detailsNEMA 1-15P to IEC C13 Short Cable Cord,IEC 320 C13 Kettle to NEMA 1-15P 2 Pin JP US Male Plug AC Power Cable Cord Adapter Charger Monitor 10A 250 V
Connector genderMale to Female
Size & build
Overall length1.6 ft/50 cm(end-to-end)
Cable shieldingDouble-shielded
Conductor typeCopper Conductor

Other versions of this model

4 more in the same range

Questions about this item

How do I install the NEMA 1-15P to C13 cord and what step is often missed?

Plug the NEMA 1-15P male end into a JP/US wall outlet and the C13 female end into the device inlet. The step often missed is verifying the device draws no more than 10A at 250V.

What maintenance or replacement will this 18AWG copper cable need over time?

Inspect the double-shielded jacket and both connectors for cracking, discoloration or loose pins. Replace the cord if insulation damage appears or the PSE/JET certification label becomes illegible.

What limit appears first when the cord runs continuously at high load?

The 10A 250V rating is the first limit; sustained current above 10A will overheat the 18AWG copper conductor despite the double shielding and PSE/JET certification.

More in Jumper & Adapter Power Cords

Similar items