We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 1 ft power cord with NEMA 1-15P male plug and IEC C13 female connector, double-shielded copper conductors

TeKit

TeKit NEMA 1-15P to C13 Power Cord 1ft 18AWG 10A 250V

SKU CH-V6GW-1BS07

A short 1 ft power cord connects a NEMA 1-15P plug to an IEC C13 inlet using 18 AWG copper conductors rated 10 A 250 V

  • Connector count2
  • Connector detailsNEMA 1-15P to IEC C13 Short Cable Cord,IEC 320 C13 Kettle to
  • Connector genderMale to Female
  • Cable shieldingDouble-shielded
  • Conductor typeCopper Conductor
  • Product typeCable Connectors

Size 1 ft

  • Connects standard US plug to C13 inlet for broad device compatibility
  • One-foot length reduces cable clutter in tight workspaces
  • 18 AWG copper conductor rated 10 A 250 V for safe power delivery
  • Double-shielded construction with PSE/JET certification ensures reliable operation
  • Male-to-female design extends reach without blocking adjacent outlets

TeKit NEMA 1-15P to C13 Power Cord

This 1 ft cable connects a NEMA 1-15P two-prong plug to an IEC 60320 C13 inlet. It is built for desktop computers, monitors and office equipment that need a short reach to a UPS or wall socket. The 18 AWG copper conductor is rated for 10 A at 250 V and carries PSE/JET certification. Double shielding and a heavy-duty jacket protect the conductors during frequent use.

Who this suits and who should look elsewhere

The short 30 cm length suits setups where the power supply sits close to the outlet or UPS, reducing cable clutter in tight racks or desk grommets. Builders needing a longer run to a distant wall socket, or those requiring a grounded three-prong input plug, will not be served by this cord. Devices that demand a higher amperage rating or a different IEC connector type also fall outside its specification.

Bundled accessories and software impact

The package contains only the single power cord; no additional cables, adapters or software are included. The PSE/JET certification on the C13 end confirms compliance with Japanese safety standards for connected equipment. The oxygen-free copper conductors and double shielding aim to minimise energy loss and electromagnetic interference. No driver installation or configuration is required for operation.

How it compares

Measured against everything we stock in Jumper & Adapter Power Cords, at today’s prices. Recalculated every night.

Price $5.99
Cheaper than about 94% of the 402 comparable items (median $13.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameTekit
Product typeCable Connectors
Product colorBlack
Ports & slots
Connector count2
Connector detailsNEMA 1-15P to IEC C13 Short Cable Cord,IEC 320 C13 Kettle to NEMA 1-15P 2 Pin JP US Male Plug AC Power Cable Cord Adapter Charger Monitor 10A 250 V
Connector genderMale to Female
Size & build
Overall length1 ft (0.3 m)
Cable shieldingDouble-shielded
Conductor typeCopper Conductor

Other versions of this model

4 more in the same range

Questions about this item

Does this cable need a grounded outlet to work?

The NEMA 1-15P plug has two pins and fits standard ungrounded US or JP wall sockets, so no ground connection is required.

Will the C13 end still fit the power supply on my older monitor or PC?

The IEC 60320 C13 connector is the long-standing three-pin kettle lead used on most desktop PSUs and monitors, so it mates with legacy equipment.

How can I confirm the cord is delivering power after I plug it in?

The device you connect — monitor, PC or charger — will power on normally, showing the 18AWG copper conductors are carrying current up to the 10 A 250 V rating.

More in Jumper & Adapter Power Cords

Similar items