TeKit SATA to IDE 2.5" Adapter 44 Pin Male 22 Pin SATA Green
Connects a 2.5" SATA drive to a 44-pin IDE laptop port for drive upgrades without extra cables or drivers
- Adapter typeSATA to IDE Laptop Adapter, Convert 2.5 in Serial ATA HDD Ha
- Product colorGreen
- DetailsSATA to IDE Laptop Adapter, Convert 2.5 in Serial ATA HDD Ha
- Key featuresSATA to IDE Laptop Adapter, Convert 2.5 in Serial ATA HDD Ha
- In the box1pc
- Upgrade older laptops with modern 2.5 SATA drives using the 44 pin IDE interface
- Power the drive directly from the 44 pin IDE connector without extra cables
- Plug and play installation requires no drivers for immediate use
- Supports IDE transfer rates of 66 100 and 133 MB/s for broad compatibility
- Compact 2.72 x .55 x .69 inch board fits tight laptop bays
SATA-to-IDE adapter for 2.5" drives
This green adapter converts a 2.5 inch SATA hard drive or SSD to a 44 pin male IDE connector. It draws power directly from the 44 pin IDE port so no extra cables are required. The board measures 2.72 by .55 by .69 inches. Condition is new.
Bundled adapter only
The package contains one 22 pin SATA to IDE 2.5 male horizontal adapter and nothing else. No driver installation is needed because the device operates plug and play. Hot swapping is not supported by this design.
Suits legacy laptop upgrades
Users upgrading older laptops that only accept 44 pin IDE 2.5 inch drives can install modern SATA storage up to 500 GB. Builders needing hot-swap capability or larger drive support should look elsewhere.
How it compares
Measured against everything we stock in Other Adapters & Couplers, at today’s prices. Recalculated every night.
- Price $9.99
- Cheaper than about 77% of the 1,761 comparable items (median $18.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Tekit |
| Product color | Green |
| Adapter type | SATA to IDE Laptop Adapter, Convert 2.5 in Serial ATA HDD Hard Disk Drive or SSD to 44 Pin Male PATA Port (Parallel Type) |
| In the box | |
| In the box | 1pc |
Questions about this item
Will the 44-pin IDE connector wear out from repeated drive swaps?
The 44-pin male IDE connector is rated for standard mating cycles; avoid frequent insertion and removal to maintain reliable contact.
Does the bridge board throttle at sustained IDE 133 MB/s transfers?
The adapter supports IDE 66, 100 and 133 MB/s modes; sustained throughput will be limited by the drive and host controller rather than the bridge.
Does the adapter draw extra power from the 44-pin IDE port during all-day operation?
Power is supplied entirely through the 44-pin IDE connector; the board adds no separate power requirement and runs without active cooling.
More in Other Adapters & Couplers
Similar items
Cables To Go 03411 Two Port Keystone Single Gang Wall Plate White
- White
- With a wide selecti…
Advantech XCHF02 USB-C to HDMI Adapter 4K@30Hz 8.07in Black
- Black
- 2, 3 A, 8, inches,…
Monoprice Inc. 8729 S/PDIF Toslink gender changer White
- White





