We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black triangular mini tower case with tempered glass side panel and non-slip base

Thermaltake

Thermaltake CA-1L9-00S1WN-01 Navigator L5 Micro ATX Mini-ITX PC case

SKU CH-A7P0-MPQVQ MPN CA-1L9-00S1WN-01

Micro-ATX and Mini-ITX tower with tempered-glass side panel, top and bottom dust filters, pre-fitted 120 mm fan, room for 335 mm GPU and 240 mm radiator

  • Max graphics card lengthFront without any heat dissipation: 335 mm(Without front wat
  • Housing materialSPCC / Tempered Glass
  • Supported motherboard sizesMini ITX/Micro ATX
  • Side panel typeWith Side Window
  • Dust filteringTop and bottom
  • 3.5-inch internal bays2
  • Supports Mini-ITX and Micro-ATX motherboards for compact builds
  • Pre-installed 120 mm rear fan provides immediate airflow
  • Tempered-glass side panel shows internal components clearly
  • Top and bottom dust filters reduce internal dust buildup
  • Fits graphics cards up to 335 mm long without front cooling

Compact Micro-ATX and Mini-ITX chassis

The Thermaltake Navigator L5 is a black mid-tower case built from SPCC steel and tempered glass. It accepts Mini-ITX and Micro-ATX motherboards and ships with a single 120 mm rear fan. The triangular translucent hollow side panel adds visual interest while showing internal components.

Straightforward assembly with length limits

Installation follows a conventional layout, but GPU clearance changes with front cooling: 335 mm without front devices, 275 mm with a 240 mm radiator, and 305 mm with front fans. CPU coolers up to 165 mm fit, and the power supply must not exceed 200 mm including its modular plug. Dust filters on top and bottom simplify maintenance.

Steady thermals under sustained load

Top and front mounts each support a 240 mm radiator, while the front can hold three 120 mm or two 140 mm fans and the top mirrors that capacity. This airflow headroom lets the case dissipate heat during long rendering or gaming sessions rather than only short bursts. Front USB 2.0, USB 3.0 and audio ports stay accessible throughout.

How it compares

Measured against everything we stock in Tower & Desktop PC Cases, at today’s prices. Recalculated every night.

Price $47.99
Cheaper than about 91% of the 1,468 comparable items (median $100.99).
Max graphics card length Front without any heat dissipation: 335 mm(Without front water cooling and fan),The length limit for installing front water cooling is 275 mm,The length of the fan before installation is limited to 305 mm
Lower than about 82% of the 894 comparable items (median 400 mm).

New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameThermaltake
Part numberCA-1L9-00S1WN-01
Product typeMicro ATX / Mini-ITX
Product colorBlack
Storage
3.5-inch internal bays2
2.5-inch internal bays3
Ports & slots
Front panel portsUSB 2.0 / USB 3.0 / Audio
Power
Power supply includedNo
Size & build
Housing materialSPCC / Tempered Glass
Side panel typeWith Side Window
Dust filteringTop and bottom
Fan mounting optionsFront: 3 × 120 mm, 2 × 140 mm
Top: 2 × 120 mm, 2 × 140 mm
Rear: 1 × 120 mm
Product dimensions428 × 395 × 210 mm
Product weight5.5 kg
Compatibility
Supported motherboard sizesMini ITX/Micro ATX
Radiator supportTop: 1 × 240 mm
Front: 1 × 240 mm
CPU cooler height limit165 mm
PSU length limit200 mm (including the module plug)

Questions about this item

What is the maximum graphics-card length if I install a front 240 mm radiator?

With a 240 mm radiator mounted at the front the graphics card must not exceed 275 mm.

How many 3.5-inch and 2.5-inch drives can I fit at the same time?

You can install two 3.5-inch drives and three 2.5-inch drives, or one 3.5-inch drive with two 2.5-inch drives in the dedicated HDD cage.

What size power supply will fit in this case?

The power supply can be up to 200 mm long including the modular plug.

More in Tower & Desktop PC Cases

Similar items