We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black sleeved PWM fan hub splitter cable with one 4-pin female to five 4-pin male connectors, 15.7 inch length

ThreeBulls 1-to-5 PWM Fan Hub Splitter Cable 15.7 Inch

SKU CH-V5WB-XQ6DN

Connects one motherboard header to five PWM or 3-pin fans using a 15.7-inch sleeved cable

  • Connector details4 Pin/3pin to Male-to-Female
  • Connector genderMale to Female
  • Cable shielding1 to 5,1 Pack
  • Conductor typePolycarbonate
  • Build detailsCoaxial
  • Product type1 to 5,1 Pack
  • Connect up to five fans from a single motherboard header
  • Supports both 4-pin PWM and 3-pin fan connectors
  • 7 inch length gives flexible routing inside the case
  • Black braided sleeving protects wires and keeps the build tidy
  • Male-to-female design plugs directly between board and coolers

PWM fan hub for desktop builds

This ThreeBulls splitter connects one motherboard header to five case or CPU fans using a single 4-pin PWM source. The 15.7 inch sleeved cable keeps routing tidy inside standard ATX and micro-ATX chassis. It suits builders adding multiple intake or exhaust fans without extra headers.

Practical limits of the 4-pin PWM interface

The hub passes one PWM control signal to all five outputs so every connected fan runs at the same duty cycle. Three-pin fans receive constant 12 V power and cannot be speed-controlled through this adapter. Total current draw must stay within the motherboard header rating.

Single 4-pin male header supplies all five fans

The splitter draws power from one 4-pin male plug on the board, distributing it across five female connectors. If the combined fan current exceeds the header limit, the system may throttle or shut down. Builders needing independent speed curves or higher aggregate current should use a powered hub instead.

How it compares

Measured against everything we stock in Y-Splitter Power Cables, at today’s prices. Recalculated every night.

Price $12.99
Cheaper than about 60% of the 433 comparable items (median $13.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameThreeBulls
Product type1 to 5,1 Pack
Product color1 to 5,1 Pack
Ports & slots
Connector details4 Pin/3pin to Male-to-Female
Connector genderMale to Female
Size & build
Cable shielding1 to 5,1 Pack
Conductor typePolycarbonate
Build detailsCoaxial

Questions about this item

How many fans can I connect with the 1-to-5 splitter?

The hub splits a single 4-pin header into five connectors, so you can run up to five PWM or voltage-controlled fans from one motherboard socket.

Will the 15.7-inch length reach from my motherboard fan header to the top or rear case mounts?

At 15.7 inches the sleeved cable spans most mid-tower layouts, giving enough slack to route behind the motherboard tray to top, rear or front fan positions.

Does the 4-pin PWM header on the splitter pass speed control to 3-pin fans as well?

The splitter carries the PWM signal to all five ports; 4-pin fans receive full PWM control while 3-pin fans run at variable voltage governed by the same header.

More in Y-Splitter Power Cables

Similar items