We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver XLR condenser microphone on steel boom arm with shock mount and pop filter

TONOR TC20 XLR Condenser Microphone Kit with T20 Boom Arm Silver

SKU CH-ZRXW-M0QQQ

XLR condenser kit with 16 mm capsule, cardioid pattern, 20 Hz–20 kHz response and 94 dB SNR, includes steel boom arm, shock mount, pop filter and 2 m cable

  • ConnectionXLR
  • Mic sensitivity-45 decibels
  • Mic impedance2200 ohm
  • Mic signal-to-noise ratio78 decibels
  • Product colorSilver
  • Key featuresStand
  • Cardioid pattern cuts room noise for cleaner vocals
  • 16 mm capsule captures 20 Hz–20 kHz range
  • 94 dB signal-to-noise ratio delivers quiet recordings
  • Sturdy T20 boom arm clamps desks up to 2.4 in thick
  • Kit includes shock mount, pop filter, 2 m XLR cable

What this kit includes

The TONOR TC20 is a silver XLR condenser microphone bundled with a T20 steel boom arm, metal shock mount, pop filter, mic cover, cable ties, a 2-metre XLR cable and a manual. It is aimed at podcasters, streamers, voice-over artists and home-studio recordists who want a complete desk-mounted setup for vocal capture.

Power and connection requirements

This condenser microphone requires 48V phantom power supplied by an audio interface, mixer or dedicated preamp; it will not operate from a USB port or computer sound card alone. Verify that your interface provides phantom power and an XLR input before ordering, and ensure your desk thickness does not exceed 60mm for the supplied clamp.

Noise floor and acoustic performance

The capsule delivers a cardioid polar pattern with a 94dB signal-to-noise ratio and 78dB SNR, suppressing off-axis sound to reduce room noise. Maximum SPL handling reaches 120dB with THD below 1%, so loud vocals or instruments stay clean. The FET preamplifier and shock mount further limit mechanical vibration and electronic self-noise during typical recording sessions.

How it compares

Measured against everything we stock in Streaming & USB Microphones, at today’s prices. Recalculated every night.

Price $55.99
Pricier than about 56% of the 1,309 comparable items (median $47.99).

Specifications

Product
Brand nameTONOR
Model nameTC20
Part numberTNTN120109BL
Product colorSilver
Audio & video
Mic sensitivity-45 decibels
Mic impedance2200 ohm
Mic signal-to-noise ratio78 decibels
Ports & slots
ConnectionXLR

Questions about this item

What comes in the box and do I need to buy anything else to use the TC20?

The kit includes the condenser microphone, T20 boom arm, metal shock mount, pop filter, mic cover, four cable ties, a 2 m XLR cable and the manual. You must supply 48 V phantom power from an audio interface, mixer or preamp — it is not included.

How do I decide between the different versions or capacities of this microphone?

The TC20 is a single model with a 16 mm capsule, cardioid pattern and 20 Hz – 20 kHz response; no alternate versions or capacities are offered.

What does the -45 dB sensitivity figure mean when I plug the mic into my interface?

At 1 kHz the capsule outputs roughly 5.6 mV per pascal of sound pressure, so a typical 48 V phantom-powered preamp will deliver a healthy signal level without excessive gain.

More in Streaming & USB Microphones

Similar items