TP-Link TL-PI90X 10G PoE++ Injector 90 W wireless accessory

10G PoE++ Injector for 90 W devices

The TP-Link TL-PI90X is a 10G PoE++ injector that delivers up to 90 W of power alongside multi-gigabit data over a single Ethernet cable. It targets installers who need to supply high-power wireless access points, IP cameras or similar PoE++ equipment without running separate power lines. The integrated power supply and durable metal casing suit both wall-mounted and desktop deployments in commercial environments.

Check cabling and powered-device class before

Verify that the device you intend to power accepts IEEE 802.3bt Class 8 (90 W) input and uses an RJ45 connection. The link requires Cat 6a or better cabling to achieve the 10 Gbps rate; lower categories will negotiate down to 5 Gbps, 2.5 Gbps, 1 Gbps, 100 Mbps or 10 Mbps. Ensure the installation site provides a standard AC mains socket for the injector’s integrated power supply.

Sustained 90 W delivery

Under continuous load the injector maintains the full 90 W budget while the built-in negotiation logic supplies only the exact power the connected device requests, preventing overload. The metal enclosure dissipates heat without fan noise during prolonged operation at maximum throughput. Plug-and-play operation means no software configuration is needed to sustain performance over long periods.