We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Beige shielded crossover Ethernet cable with RJ45 male connectors, 7 ft length

Tripp Lite

Tripp Lite N266-007 7 ft Shielded RJ48C Crossover Network Ethernet Cable

SKU CH-DAGC-ZRFMW MPN N266-007

A 7 ft shielded RJ48C crossover patch cable with RJ45 male connectors for direct T1 network links

  • First connector1 x RJ-45 Male Network
  • Second connector1 x RJ-45 Male Network
  • Product typeT1 Cross-Over Cables
  • Overall length7 ft (2.13 m)
  • Product colorBeige
  • Key featuresCable Characteristic: Patch Cable Cable Configuration: Cross
  • 7 ft length suits short rack or desk runs
  • Shielded construction reduces electromagnetic interference
  • RJ48C crossover wiring enables direct T1 circuit links
  • Copper conductors meet ANSI T1.403 performance standard
  • RoHS compliant materials support environmental requirements

Direct-connect T1 link

The Tripp Lite N266-007 is a 7 ft shielded crossover cable terminated with RJ45 male plugs on both ends. It is built for technicians and installers who need a direct T1 circuit between two network devices without an intermediate hub or switch.

Stable signal over the full run

Shielded construction and copper conductors suppress electromagnetic interference across the 7 ft length. The cable meets ANSI T1.403 requirements, so sustained T1 framing and signalling remain within specification during continuous operation.

Replaces a straight-through patch lead

It upgrades any existing straight-through patch cord when the application demands a crossover pin-out for T1 equipment. The change is worthwhile only when both endpoints require the transmit and receive pairs swapped; standard Ethernet links will not function with this cable.

How it compares

Measured against everything we stock in Ethernet & LAN Cables, at today’s prices. Recalculated every night.

Price $23.99
Pricier than about 68% of the 9,945 comparable items (median $14.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameTRIPP LITE
Model nameN266-007
Product typeT1 Cross-Over Cables
Product colorBeige
Ports & slots
First connector1 x RJ-45 Male Network
Second connector1 x RJ-45 Male Network
Size & build
Overall length7 ft (2.13 m)
ShieldingYes
Shipping weight0.16 kg
Package size239 × 224 × 5 mm

Questions about this item

Does the shielded construction keep the 7 ft crossover link stable when the cable runs alongside power leads all day?

The N266-007 uses a shielded RJ48C crossover design with copper conductors that resist electromagnetic interference, so the 7 ft link stays reliable even in electrically noisy environments.

What equipment must already have RJ48C ports for this T1 crossover cable to plug straight in?

Both endpoints need RJ48C interfaces wired for T1 crossover operation — typical examples are CSU/DSU units, T1 routers or dedicated T1 network cards with matching pin-outs.

Will the ANSI T1.403 crossover pin-out work with older T1 gear that expects straight-through RJ48C wiring?

No — this cable crosses the transmit and receive pairs to meet ANSI T1.403, so it only connects two T1 DTE ports directly; legacy straight-through links need a different cable.

More in Ethernet & LAN Cables

Similar items