We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 1U rackmount UPS with front status LEDs and six rear outlets

Tripp Lite

Tripp Lite SMART1000RM1UN 1000VA 800W 1U Rack UPS

SKU CH-03X7-2N3MG MPN SMART1000RM1UN

1U rack UPS delivers 1000VA sine-wave power with automatic voltage correction from 83V to 147V, six outlets and a pre-installed network card

  • AC input voltage120 V AC
  • Power inputNEMA 5-15P
  • Volt-ampere rating1000 VA
  • Power rating800 W
  • Voltage output120 V
  • Power outlets6

VA 1000 VA w/ WEBCARDLX

  • Sine-wave output protects sensitive equipment
  • Corrects voltage from 83V to 147V without battery drain
  • Pre-installed WEBCARDLX enables remote network management
  • Two outlets switchable via network for load control
  • 14 minutes runtime at 400W half load

1U Rackmount UPS with Sine Wave Output

The Tripp Lite SMART1000RM1UN is a line-interactive UPS that delivers 1000 VA and 800 W of sine wave power in a 1U rackmount chassis. It corrects brownouts and overvoltages from 83V to 147V without using battery power. Six NEMA 5-15R outlets provide protected connections for servers and network gear.

Verify 120V Input and NEMA 5-15P Compatibility

Confirm that your facility supplies 120V AC and that the NEMA 5-15P input plug matches your power source or PDU. The unit requires a standard 15-amp circuit and fits a 1U rack space measuring 1.75 inches in height. Ensure the 16.75-inch depth clears your rack rails and cable management.

Replaces Non-Sine-Wave or Tower Units

This model replaces standby or simulated-sine-wave UPS units when connected equipment requires pure sine wave output. It also upgrades tower-form-factor backups to a 1U rackmount design with a pre-installed WEBCARDLX network interface for remote management. The jump is worth it when you need network-managed, switchable outlets and automatic voltage regulation in a compact rack footprint.

How it compares

Measured against everything we stock in Uninterruptible Power Supplies (UPS), at today’s prices. Recalculated every night.

Price $1,034.99
Typical for this category: the median of 1,153 items is $948.99.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameTRIPP LITE
Model nameSMART1000RM1UN
Ports & slots
Communication portsDB9 Serial; EPO (emergency power off); Pre-installed network card; USB
Power
AC input voltage120 V AC
Power inputNEMA 5-15P
Volt-ampere rating1000 VA
Power rating800 W
Voltage output120 V
Power outlets6
Battery typeValve Regulated Lead Acid (VRLA)
Runtime on batteryFull Load Runtime (minute): 4 minutes (800 W)
Half Load Runtime (minute): 14 minutes (400 W)
Replacement batteryRBC69-1U
AlertsAudible alarm indicates power-failure, overload and low-battery conditions
Surge protection rating450 Joules
Size & build
Rack mounting1U
Product dimensions1.75 in × 17.5 in × 16.75 in
Product weight32 lb (14.5 kg)
Shipping weight15.88 kg
Package size584 × 546 × 127 mm
Environment & compliance
Regulatory approvalsTested to UL1778 (USA); Tested to CSA (Canada); Tested to NOM (Mexico); Meets FCC Part 15 Category A (EMI)
Software
Control softwarePowerAlert Software

Other versions of this model

4 more in the same range

Questions about this item

What comes in the box and do I need to buy any cables or batteries separately?

The UPS ships with the WEBCARDLX network card already installed, a USB cable, a DB9 serial cable, mounting brackets for two- and four-post racks and the internal VRLA battery. No extra battery or cables are required for basic operation.

Should I choose a different VA or wattage model for my load?

This unit delivers 1000 VA and 800 watts at a 0.8 power factor; select it when your connected equipment draws up to 800 watts. A lower-wattage model would not support that load, while a higher-wattage model adds capacity you do not need.

What does the 4-minute runtime at full load mean for my servers?

At the full 800-watt load the battery lasts 4 minutes, enough for an orderly shutdown. At a typical half load of 400 watts the runtime extends to 14 minutes, giving more time for automated scripts to complete.

More in Uninterruptible Power Supplies (UPS)

Similar items