We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Tripp Lite

Tripp Lite SMART1500RMXLN 1440VA 1440W 120V UPS 8 Outlets Network Card 2U

SKU CH-AKJ4-S2MF8 MPN SMART1500RMXLN

1.44 kVA line-interactive UPS with eight NEMA 5-15R outlets, AVR, LCD, pre-installed network card and 2U rack/tower form factor

  • Voltage version120 V
  • AC input voltage80 V-151 V; adjustable to 70-153 V
  • Power inputNEMA 5-15P
  • Volt-ampere rating1440 VA
  • Power rating1440 W
  • Voltage output120 V
  • 44 kVA capacity supports critical IT loads
  • Sine-wave output protects sensitive connected equipment
  • Pre-installed network card enables 24/7 remote management
  • Automatic voltage regulation corrects 80 V to 151 V input range
  • 1 minutes runtime at full 1440 W load

1440VA Line-Interactive UPS for Rack Deployments

The Tripp Lite SmartPro SMART1500RMXLN delivers 1440VA and 1440W of sine-wave battery backup in a 2U rackmount chassis. It provides eight NEMA 5-15R outlets and includes a pre-installed network management card for remote monitoring. Automatic voltage regulation corrects input fluctuations between 80V and 151V without using battery power.

Upgrade from Standby Units When Runtime Matters

This model replaces basic standby UPS units that cannot correct voltage without draining the battery. The jump is worth it when connected equipment requires pure sine-wave output or when extended runtime at half load is needed. At 720W load the internal VRLA batteries provide 15.1 minutes of backup, while full 1440W load yields 5.1 minutes.

Standard 2U Rack Install with Network Card Ready

The unit mounts in a standard 2U rack space measuring 3.45 inches high, 17.20 inches wide and 17.60 inches deep. Communication ports include USB, DB9 serial, contact closure and an emergency power off connector alongside the factory-fitted network card. Recharge from 10% to 90% takes less than 4.5 hours after a full-load discharge.

How it compares

Measured against everything we stock in Uninterruptible Power Supplies (UPS), at today’s prices. Recalculated every night.

Price $1,154.99
Pricier than about 56% of the 1,153 comparable items (median $948.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameTRIPP LITE
Product lineSmartPro
Model nameSMART1500RMXLN
Ports & slots
Communication portsContact closure; DB9 Serial; EPO (emergency power off); Micro-USB; Pre-installed network card; USB (HID enabled); USB-A
Power
Voltage version120 V
AC input voltage80 V-151 V; adjustable to 70-153 V
Power inputNEMA 5-15P
Volt-ampere rating1440 VA
Power rating1440 W
Voltage output120 V
AC output frequency50 / 60 Hz
Power outlets8 x NEMA 5-15R
Battery typeValve Regulated Lead Acid (VRLA)
Runtime on batteryFull Load (min.): 5.1 min. (1440w)
Half Load (min.): 15.1 min. (720w)
Battery charge timeLess than 4.5 h from 10% to 90% (typical, full load discharge)
Surge protection rating380 Joules
Size & build
Rack mountingYes
Product dimensions3.45 in × 17.2 in × 17.6 in
Product weight50.71 lb (23 kg)
Shipping weight24.95 kg
Package size584 × 508 × 229 mm
In the box
In the box1440 VA 1440 W 120 V Line-Interactive UPS
WEBCARDLXE network management card
USB cable
DB9 cable
Rack-mounting hardware
Tower support stands
Safety instructions
Quick Start Guide
Environment & compliance
Temperature rangeOperating Temperature Range: 32° to 104 °F (0° to 40 °C)
Storage Temperature Range: 5° to 122 °F (-15° to 50 °C)
Humidity range0-95% non-condensing

Other versions of this model

5 more in the same range

Questions about this item

What rack depth is required for the 17.60-inch deep 2U chassis?

The unit measures 17.60 inches deep, so a rack or shelf with at least that usable depth plus cable clearance is needed.

How do you connect the pre-installed network card for remote monitoring?

Plug an Ethernet cable into the card's RJ45 port, then configure the IP address through the front-panel LCD or the USB HID interface.

When should the VRLA battery pack be replaced?

Expect replacement after 3 to 5 years; the LCD will show a battery fault and run time will drop well below the 5.1-minute full-load rating.

More in Uninterruptible Power Supplies (UPS)

Similar items