STARTECH USB312SAT3CB USB 3.1 Gen 2 to SATA converter cable 2.5
- 2.5 in (6.35 cm)
- USB to SATA
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Adds four RS-422/485 serial ports to a PC, Mac or Linux system via USB with automatic mode switching and per-port DIP-switch configuration
The Tripp Lite U208-004-IND connects up to four RS-422 or RS-485 serial devices to a single USB-B host port. It draws power from the USB bus and ships with a 3-foot USB-A to USB-B cable, eight DIP-switch jumpers and a driver CD. Each DB9 male connector is independently configurable via DIP switches, and the adapter automatically reassigns COM-port numbers to simplify setup.
Engineers integrating multiple sensors, PLCs or legacy serial equipment into modern PC, Mac or Linux systems will value the four-port density and automatic RS-422/485 detection. Installations that need only one serial link, or that rely on a different signalling standard, should select a single-port or protocol-specific adapter instead.
The unit provides four DB9 male ports that each auto-detect and switch between RS-422 and RS-485 modes, removing the need for manual protocol selection per device. This single capability determines whether the converter matches the installed serial bus.
Measured against everything we stock in USB Adapter Cables & Dongles, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Tripp Lite |
| Model name | U208-004-IND |
| Product type | USB-B to DB9 F/M |
| Product color | Black |
| Ports & slots | |
| First connector | 1 x USB-B Female |
| Second connector | 4 x DB9 Male |
| Size & build | |
| Shipping weight | 0.52 kg |
| Package size | 234 × 157 × 58 mm |
The adapter provides four DB9 male ports that auto-detect and switch between RS-422 and RS-485 for each connected device.
The unit is bus-powered with no fan, so it runs silently and produces only minimal warmth during all-day use.
Drivers support PC, Mac and Linux; a 3 ft USB-A to USB-B cable is included in the package.
More in USB Adapter Cables & Dongles
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?