We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Square black frame cooling fan with seven blades and three-pin connector

TSUJ

TSUJ 2806KL-04W-B39 C01 DC12V 0.17A 7015 70x70x15mm 3Pin Cooling Fan

SKU CH-S26Z-HRW1G

12 V DC cooling fan with 70×70×15 mm frame and three-pin connector for projector use

  • Key features1pcs 2806KL-04 W-B39 C01 DC12 V 0.17A 7015 7CM 70 × 70 × 15
  • DC 12 V operation powers projector cooling reliably
  • 17 A draw keeps energy use low
  • 70 × 70 × 15 mm frame fits tight 7 cm bays
  • 3-pin connector enables speed monitoring and control

Compact 70 mm DC fan for projector cooling

The TSUJ 2806KL-04W-B39 C01 is a 70 mm square frame fan designed to fit projector housings and similar tight enclosures. It runs on 12 V DC and draws 0.17 A through a standard three-pin connector. The 15 mm thickness keeps the profile low for space-constrained builds.

Low current draw and simple three-pin power

At 0.17 A the fan adds minimal load to a 12 V rail and does not require a dedicated high-current header. The three-pin interface supplies power and tachometer feedback without PWM complexity. Operation stays quiet in typical projector duty cycles. No extra wiring or adapter is needed.

How it compares

Measured against everything we stock in Pedestal, Table & PC Fans, at today’s prices. Recalculated every night.

Price $10.99
Cheaper than about 90% of the 302 comparable items (median $31.99).

Specifications

Product
Brand nameTSUJ
Part numberKepler-C72J-OYS-0032

Questions about this item

How do I install the TSUJ 2806KL-04W-B39 fan and what step is often missed?

Align the 70 mm square frame with the projector's mounting holes, connect the 3-pin plug to the 12 V header, and secure all four corners; the step often missed is checking that the 0.17 A draw matches the board's fan-header limit before powering on.

What maintenance will the TSUJ 7015 fan need later?

Expect to clean dust from the 70x70x15 mm blades every few months; if bearing noise appears or airflow drops, replace the entire 12 V unit as the bearings are not serviceable.

More in Pedestal, Table & PC Fans

Similar items