We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact PoE splitter with short RJ45 and barrel cables

Tycon Power Systems

Tycon Power Systems POE-MSPLT-4805 48V 802.3af/at PoE Splitter 5V 12W

SKU CH-WZ3K-WTGCF

Converts 48V 802.3af/at PoE into regulated 5V 12W DC via 5.5 mm 2.1 mm barrel connector with data pass-through on RJ45

  • Converts 48V PoE to regulated 5V DC output
  • Delivers up to 12W power with 2.4A current capacity
  • Supports IEEE 802.3af/at PoE standards for broad compatibility
  • Isolated input and output with short-circuit and overload protection
  • Compact adapter with 5.5mm barrel and RJ45 connectors on 6in cables

Compact PoE Splitter for 5 V Devices

The Tycon Power Systems POE-MSPLT-4805 converts an active IEEE 802.3af/at 48 V PoE input into a regulated 5 V DC supply. It delivers up to 12 W continuous output with a 5.5 mm × 2.1 mm barrel connector and passes data through a dedicated RJ-45 port on six-inch cables. Short-circuit and over-current protection are built in.

Ideal for Low-Power 5 V Gear; Not for Other Voltages

Installers powering 5 V cameras, sensors, or wireless access points from a PoE switch will find the 2.4 A output a direct match. It is not for devices that require 12 V or any voltage other than 5 V, nor for applications that exceed the 12 W regulated output or the 15 W input ceiling.

5 V 2.4 A Regulated Output on Barrel Connector

The single specification that decides fit is the fixed 5 V DC output at 2.4 A provided on a 5.5 mm × 2.1 mm barrel plug. If the target device needs a different voltage, a higher current, or a different connector type, this splitter will not work.

How it compares

Measured against everything we stock in Wi-Fi Access Points, at today’s prices. Recalculated every night.

Price $53.99
Cheaper than about 91% of the 782 comparable items (median $253.99).

Specifications

Product
Brand nameTycon Power Systems

Questions about this item

What PoE standard and voltage must my switch or injector provide for the POE-MSPLT-4805 to operate?

The splitter requires an active IEEE 802.3af/at PoE input at 48 VDC to power the 5 VDC output.

Can I keep my existing 10/100 Mbps Ethernet cabling when I add this splitter?

Yes, the data path supports 10/100 MB Ethernet speeds so your current Cat5 or Cat5e runs will work unchanged.

How can I confirm the splitter is delivering the correct 5 VDC after installation?

Measure 5 VDC at the 5.5 mm × 2.1 mm barrel connector with a multimeter; the regulated output should be present when the PoE link is active.

More in Wi-Fi Access Points

Similar items