Tripp Lite PV400USB 400W power inverter 12V 120V 2 USB 2 outlet
- 2 × 5-15R
- 3 ft (0.91 m)
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Converts 48 V DC to split-phase 110 V and 220 V AC at 60 Hz with 16 000 W continuous and 64 000 W peak power, pure sine wave output, built-in UPS and battery charger
This u-power unit converts 48V DC into 110V and 220V AC at 60Hz with a low-frequency pure sine wave. It delivers 8000W continuous per phase and 16000W total continuous with a 64000W peak rating. An integrated UPS charger and LCD display are included for battery management and monitoring.
Ensure your 48V battery bank can supply the high DC current required for 16000W continuous output. Cables and fuses must be rated for the corresponding amperage at 48V. Confirm that your AC loads match the split-phase configuration and that the installation environment meets code for high-power inverters.
Ideal for installations that run 110V and 220V loads simultaneously from a 48V bank. Not suited for buyers who only need a single voltage output or who require a 220V-preferred control board with full LCD readout on 220V-only loads. Users with smaller battery banks or lower power demands should consider lower-capacity models.
Measured against everything we stock in DC-to-AC Power Inverters, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | U-POWER |
The inverter includes an LCD display, integrated UPS function and a 110 V battery charger. You must supply a 48 V DC battery bank and all DC/AC cabling.
The control board is optimised for 110 V regulation; balanced 110 V and 220 V loading or 110 V-heavy loading is recommended for accurate LCD read-outs.
It delivers 8000 W on each 110 V leg and 8000 W on the 220 V leg simultaneously, totalling 16000 W continuous with 32000 W peak per leg.
More in DC-to-AC Power Inverters
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?