Monoprice Inc. 140885 Flat Cat6 Network Ethernet Cable 10 ft Black 30AWG 550MHz
- Networking Patch Ca…
- 10 ft (3.05 m)
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 1-foot direct-attach cable links UniFi devices at 25, 10 or 1 Gbps with a .78 inch minimum bend radius
This one-foot direct-attach cable links Ubiquiti UniFi devices using SFP28 connectors on both ends. It supports 25 Gbps, 10 Gbps and 1 Gbps data rates for high-bandwidth interconnects. The white PVC jacket protects the assembly in rack or cabinet environments. Buyers needing longer reach or fibre media will need a different cable type.
The cable plugs directly into matching SFP28 ports with no tools required and auto link optimization handles speed negotiation. A minimum bend radius of 0.78 inch must be observed to avoid signal degradation. Sharp bends or excessive tension during cable routing are the typical causes of intermittent links. Ensure both ends seat fully until the latch clicks.
The single specification that decides fit is the 25 Gbps SFP28 direct-attach interface on a fixed one-foot length. If your UniFi hardware uses SFP28 uplinks and the ports are spaced for this reach, the cable is compatible. Longer distances or different transceiver form factors require alternative media.
Measured against everything we stock in Ethernet & LAN Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
No published specifications for this item yet.
Check the UniFi controller dashboard; the port status should show a 25 Gbps link with no errors, confirming the auto-negotiation has locked at the highest supported rate.
The package contains the 1-foot SFP28 direct-attach cable only; both ends plug directly into compatible UniFi SFP28 ports, so no separate transceivers or patch cords are needed.
Use the 1-foot length only when the two UniFi devices sit in the same rack or shelf; for wider spacing select a longer SFP28 uplink cable that matches the required reach.
More in Ethernet & LAN Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?