We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver rack-mount network switch, 48 RJ45 ports and four SFP+ cages, front status LEDs, 1U height

Ubiquiti Networks

Ubiquiti Networks USW-Pro-Max-48-PoE (720W) 48-port network switch

SKU CH-P2PZ-HCHMK MPN USW-Pro-Max-48-PoE (720W)

A 48-port managed Layer 3 switch with 32 GbE and 16 2.5 GbE RJ45 ports, four 10G SFP+ uplinks, 720 W PoE budget and 112 Gbps non-blocking throughput

  • Product formatRackmount
  • Management typeManaged
  • Main ports48 x RJ45 + 4 x SFP+
  • Main port speedTotal non-blocking throughput 112 Gbit/s Switching capacity
  • Main port type(32) GbE RJ45 ports (16) 1/2.5 GbE RJ45 ports (4) 10G SFP+ p
  • Management accessEthernet In-Band

Model Pro Max 48 PoE

Primary Port 48 Port

  • Layer 3 routing and ACLs for network segmentation
  • 16 ports at 2.5 GbE with PoE++ up to 60W
  • 32 GbE ports including 24 PoE+ and 8 PoE++
  • Four 10G SFP+ uplinks for high-speed backbone
  • 720W total PoE budget powers dense device deployments

48-port Layer 3 PoE++ switch

The Ubiquiti USW-Pro-Max-48-PoE is a rackmount managed switch with 48 RJ45 ports and four 10G SFP+ uplinks. It provides Layer 3 routing including static routes, DHCP relay and inter-VLAN routing. Total non-blocking throughput reaches 112 Gbps with a 224 Gbps switching capacity. The unit ships new with mounting accessories included.

Suits networks needing high-density PoE++

This switch fits deployments that require up to 720 W of PoE budget across 48 ports, with 16 ports capable of 60 W PoE++ and 2.5 GbE speeds. It also supports Etherlighting for port identification. Buyers who do not need Layer 3 features or PoE++ power levels should look at simpler models. Sites without 10G uplink requirements will not use the SFP+ ports.

720 W total PoE budget decides suitability

The single specification that determines fit is the 720 W PoE power budget. It must cover the combined draw of all powered devices such as access points, cameras and VoIP phones. If the planned load exceeds this figure, an additional power source or a different switch is required. The 112 Gbps throughput and 166.656 Mpps forwarding rate support the switching fabric.

How it compares

Measured against everything we stock in Ethernet & PoE Switches, at today’s prices. Recalculated every night.

Price $913.99
Pricier than about 63% of the 2,759 comparable items (median $482.99).

Specifications

Product
Brand nameUbiquiti Networks
Product lineNetwork Switches
Model namePro Max 48 PoE
Part numberUSW-Pro-Max-48-PoE (720 W)
Connectivity
Management typeManaged
Main port speedTotal non-blocking throughput 112 Gbit/s
Switching capacity 224 Gbit/s
Forwarding rate 166.656 Mpps
Management accessEthernet In-Band
VLAN capabilityYes
Jumbo frame supportYes
Layer support3
Port mirroring supportYes
Ports & slots
Main ports48 x RJ45 + 4 x SFP+
Main port type(32) GbE RJ45 ports
(16) 1/2.5 GbE RJ45 ports
(4) 10G SFP+ ports
PoE-enabled ports(32) PoE/PoE+ (Pins 1, 2+; 3, 6-)
(16) 60 W PoE++ (Pair A 1, 2+; 3, 6-) (Pair B 4, 5+; 7, 8-)
Power
Power over EthernetYes
Power detailsMethod
(1) Universal input, 100—240 V AC, 50/60 Hz
(1) USP-RPS DC input
Power supply AC/DC, internal, 820 W
Supported voltage range 100—240 V AC
Total available PoE 720 W
Max power draw100 W (Excluding PoE output)
Size & build
Product dimensions442.4 × 400 × 44 mm (17.4 × 15.7 × 1.7 in)
Product weightWithout mounting brackets: 6.2 kg (13.7 lb)
With mounting brackets: 6.3 kg (13.9 lb)
Shipping weight8.04 kg
Package size541 × 521 × 119 mm
Compatibility
RequirementsUniFi Network Version 8.0.24 and later
Environment & compliance
ComplianceCE, FCC, IC
Temperature range-5 to 40 °C (23 to 104 °F)
Humidity range10 to 90% noncondensing
More details
Product formatRackmount
Indicator lightsSystem Status
Ethernet PoE
Speed/link/activity
SFP+ Link/activity
RPS Status
Control buttonsFactory reset

Other versions of this model

4 more in the same range

Questions about this item

What rack depth does the 442.4 x 400 x 44 mm switch need?

The unit is 400 mm deep, so the rack must provide at least 400 mm of usable depth.

Which step is often missed when mounting the switch in a rack?

Fit the supplied mounting accessories to the switch first, then secure the assembly to the rack posts.

When will the internal fan assembly need replacement?

The switch uses internal cooling fans; plan to replace them when airflow noise increases or the system-status LED signals a thermal warning.

More in Ethernet & PoE Switches

Similar items