We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black rectangular PoE splitter with RJ45 and Micro USB ports plus USB-C adapter attached

UCTRONICS Gigabit PoE Splitter 5V 3A 2-in-1 Micro USB USB-C 1000 Mbps Powerline Networking

SKU CH-FG65-PN90M

Delivers 5V 3A power and 1000 Mbps data over a single Ethernet cable to Micro USB or USB-C devices, compliant with IEEE 802.3af/at and protected against overvoltage, short-circuit and overcurrent

  • Connection methodIEEE 802.3
  • Powerline speeds1,000 Mbit/s
  • Connection speeds1,000 Mbit/s
  • Key featuresNon
  • Product weight0.059 kg
  • In the boxNon
  • Gigabit data and 5V 3A power over one cable
  • IEEE 802.3af/at compliant for safe PoE switching
  • 2-in-1 Micro USB and USB-C ports cover both Raspberry Pi generations
  • Overvoltage, short-circuit and overcurrent protection built in
  • Plug-and-play setup with no extra power cables needed

2-in-1 PoE Splitter with Micro USB and USB-C

The UCTRONICS Gigabit PoE Splitter combines a Micro USB and USB-C output in one unit, letting you power and connect non-PoE devices using a single Ethernet cable from a PoE switch or injector. It delivers 5V 3A output while passing 10/100/1000 Mbps data, making it suitable for Raspberry Pi boards, IP cameras, tablets, and smart home gear.

Suitable for devices needing 5V 3A from standard PoE

This splitter suits builders who want to add networked devices where no power outlet exists and whose hardware draws up to 3 A at 5 V via Micro USB or USB-C. It is not for installations that rely on passive or non-standard PoE injectors, which can over-volt and damage the connected equipment, nor for devices requiring higher voltage or current than the 5V 3A rating.

IEEE 802.3af/at compliance is the deciding factor

The splitter negotiates power only with IEEE 802.3af or 802.3at sources, so the single specification that determines compatibility is whether the upstream PoE switch or injector advertises that standard. If the power source is passive or proprietary, the unit will not protect the load and should not be used.

How it compares

Measured against everything we stock in Powerline Adapters & Kits, at today’s prices. Recalculated every night.

Price $23.99
Cheaper than about 70% of the 42 comparable items (median $30.49).

Specifications

Product
Brand nameUCTRONICS
Connectivity
Connection methodIEEE 802.3
Size & build
Product weight0.059 kg
In the box
In the boxNon
More details
Powerline speeds1,000 Mbit/s
Connection speeds1,000 Mbit/s

Questions about this item

Does the package include the Ethernet cable and PoE injector, or do I buy them separately?

The splitter has two RJ45 ports for data and power; you supply the Cat5e or better Ethernet cable and an IEEE 802.3af/at PoE switch or injector.

My Raspberry Pi 4 uses USB-C and my Pi 3 uses Micro USB — does one unit cover both?

Yes, the board has a Micro USB output and a detachable Micro USB-to-USB-C adapter so you can power either board without buying a second splitter.

What does the 1000 Mbps rating mean when the splitter is connected to my Pi?

The RJ45 ports negotiate at 10/100/1000 Mbps, so the Pi’s built-in Gigabit Ethernet runs at full line speed while the splitter delivers 5 V at up to 3 A.

More in Powerline Adapters & Kits

Similar items