We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two small brass nozzles with M6 threads and stamped size markings

Unique-Bargains

Unique-Bargains 0.4mm Brass Nozzle V6 1.75mm 2pcs

SKU CH-ZFGM-0RFKR

Two brass V6 nozzles with a 0.4 mm bore for 1.75 mm filament, M6 thread and 7 mm thread length

  • Precise 0.4mm brass nozzle for detailed prints
  • M6 thread fits V6 extruder heads directly
  • Brass construction handles PLA, ABS and PCL filaments
  • Stamped size marking allows quick identification
  • Two nozzles included for convenient replacement

Brass V6 Nozzle 0.4mm for 1.75mm Filament

These two brass nozzles fit V6 extruder heads with an M6 thread and accept 1.75mm filament. They are intended for makers printing non-abrasive materials such as PLA, ABS or PCL on compatible 3D printers. The stamped size marking on each nozzle helps identify the 0.4mm bore quickly.

Pack of Two Identical Nozzles

The bundle supplies a spare nozzle so a worn or clogged tip can be swapped without waiting for a separate order. Having a matched pair also simplifies testing different temperature settings because both nozzles share the same 0.4mm diameter and 2mm input bore.

M6 Thread Limits and Temperature Range

The M6 thread with 7mm length only fits hot-ends designed for the V6 pattern; other thread standards will not engage. Printing temperatures must stay within the material windows — roughly 180 to 220 for PLA and 240 to 280 for ABS — because brass softens above those levels.

How it compares

Measured against everything we stock in Print & Scan Accessories, at today’s prices. Recalculated every night.

Price $3.99
Cheaper than about 99% of the 5,855 comparable items (median $91.99).

Specifications

Product
Brand nameUnique Bargains

Questions about this item

How often will the 0.4mm brass nozzle need replacing when printing PLA?

Brass nozzles wear faster with abrasive filaments; for non-abrasive PLA the 0.4mm tip lasts many spools, but inspect the orifice periodically and swap once the hole visibly widens.

What temperature ceiling limits extended prints with this nozzle?

The brass construction handles standard PLA ranges of 180-220 and ABS ranges of 240-280; sustained temperatures above the filament's upper limit can soften the brass and degrade extrusion consistency.

How hot does the 12 x 7 mm brass nozzle get during all-day printing?

At PLA temperatures of 180-220 or ABS temperatures of 240-280 the nozzle reaches those target heats; the small 12 x 7 mm brass body conducts heat quickly, so the heater block and surrounding parts become very hot during continuous operation.

More in Print & Scan Accessories

Similar items