We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two small brass V6 nozzles with M6 threads and 0.5mm openings

Unique-Bargains

Unique-Bargains 0.5mm Brass Nozzle V6 M6 1.75mm 2pcs

SKU CH-D9TW-097NG

Two 0.5 mm brass nozzles with M6 threads for 1.75 mm filament on V6 hot-ends

  • Precise 0.5 mm extrusion for fine-detail prints
  • Brass construction suits PLA, ABS and PCL filaments
  • M6 thread fits V6 hot-ends directly
  • Two nozzles included for quick swaps
  • Stamped size marking simplifies identification

Brass V6 nozzles for 1.75 mm filament

Two brass nozzles with a 0.5 mm bore and M6 thread are made for V6 extruder heads that accept 1.75 mm filament. The 12 mm overall length and 7 mm thread length match the standard V6 form factor. They are suited for hobbyists and small workshops printing PLA, ABS, PCL and similar non-abrasive materials.

Check compatibility before ordering

Verify that your printer uses a V6-style hot-end with an M6 thread and that the filament path is sized for 1.75 mm stock. The nozzle input diameter is 2 mm, so the heat-break and PTFE tube must align with that dimension. After installation you must recalibrate the nozzle-to-bed distance to restore first-layer quality.

Behaviour during long prints

Brass conducts heat quickly, so the nozzle reaches working temperatures of 180 to 220 for PLA or 240 to 280 for ABS and stabilises rapidly. The consistent bore and clean threads maintain steady extrusion over extended sessions without the wear seen with abrasive composites. Allow the hot-end to cool fully before removal to avoid burns.

How it compares

Measured against everything we stock in Print & Scan Accessories, at today’s prices. Recalculated every night.

Price $3.99
Cheaper than about 99% of the 5,855 comparable items (median $91.99).

Specifications

Product
Brand nameUnique Bargains

Questions about this item

What comes in the pack and is anything else needed to fit them?

The pack contains two brass nozzles. You will need a spanner to hold the heat block and a socket screwdriver to remove the old nozzle and install the new ones.

Which nozzle size should I choose for my V6 extruder and 1.75 mm filament?

These nozzles have a 0.5 mm outlet, M6 thread, 7 mm thread length and 2 mm input bore, matching a V6 hot-end designed for 1.75 mm filament.

What does the 0.5 mm diameter mean for everyday printing?

A 0.5 mm brass nozzle works with common filaments such as PLA and ABS; after fitting, recalibrate the nozzle-to-bed distance before printing.

More in Print & Scan Accessories

Similar items