Unique-Bargains 2pcs TPMS Sensor 433MHz 8mm Black for BMW Motorcycle K-Series
A pair of 433 MHz TPMS sensors with 8 mm valve holes, black finish and OE numbers 8532732, 36318532732, 36238521796 for BMW K-series motorcycles
- Monitors tyre pressure accurately via 433 MHz signal
- Direct replacement for OE numbers 8532732 36318532732 36238521796
- Fits BMW K-series models K17 K18 K19 K40 K43 K44 K48 K61
- Easy installation with 8 mm valve hole no extra hardware needed
- Black plastic and metal construction measures 7.3 x 2.3 x 2.2 cm
Direct replacement TPMS sensors
These two black 433 MHz sensors monitor tyre pressure on listed BMW motorcycles. They suit riders who need a straight swap for a failed or missing original unit. The pack covers both wheels on a single bike.
Match OE numbers 8532732 36318532732 36238521796
Fitment is decided by the original equipment number stamped on the old sensor. Confirm that one of the three codes matches before ordering; no other identifier guarantees compatibility.
Simple valve-stem install
Each sensor threads into the 8 mm valve hole without extra hardware. The most common issue is forgetting to re-learn the IDs with a TPMS tool after fitting, which leaves the warning light active.
How it compares
Measured against everything we stock in Wheel Assemblies & Tire Chains, at today’s prices. Recalculated every night.
- Price $18.99
- Cheaper than about 86% of the 61 comparable items (median $55.99).
Specifications
| Product | |
|---|---|
| Brand name | Unique Bargains |
Questions about this item
What does the 433MHz frequency mean once the sensor is fitted to the wheel?
The 433MHz frequency is the radio band the sensor uses to send pressure data to the motorcycle's receiver; it must match the bike's TPMS system or the readings will not appear.
How does the 8mm hole diameter limit which wheels this sensor can be mounted on?
The sensor valve stem requires an 8mm (0.31") rim hole; wheels drilled for a different diameter will not accept it without modification.
What physical space does the 7.3 x 2.3 x 2.2cm body need inside the wheel well?
The sensor body measures 7.3cm long by 2.3cm wide by 2.2cm high, so the wheel's inner cavity and brake caliper clearance must accommodate those dimensions.
More in Wheel Assemblies & Tire Chains
Similar items
StanceMagic 10pcs Extended Black Lug Bolts 14x1.5 37mm Ball Seat R12
- Black





