Unique-Bargains 6 AWG 50A Quick Connect Kit Red 2pcs
A 50 A quick-disconnect kit for 6 AWG wiring with silver-plated copper terminals, stainless-steel springs, polycarbonate housings and rubber boots rated to 600 V and 125 °C
- Battery typeBattery Converter
- Quick-disconnect power for winches and trailers
- 50 A rated current handles high-draw devices
- Silver-plated copper pins ensure strong conductivity
- UL94 V0 housing resists flame up to 125 °C
- Rubber boots seal out dust and moisture
Quick-Disconnect Power Kit
The Unique-Bargains 6 AWG 50A Quick Connect Kit provides a high-current quick-disconnect solution for automotive and trailer electrical systems. Two identical red housings allow instant connection or separation of winches, inverters, solar setups or remote chargers without tools. Polarised ends prevent reverse-polarity mating while the rubber boot caps shield terminals from dust and moisture.
Build Integration Needs
Each housing accepts 6 AWG wire with a .22 inch terminal inner diameter and includes four silver-plated copper pins for crimping. The kit requires no special mounting hardware and frees up wiring space by eliminating permanent splices or bolt-on lugs. Identical housings connect to each other regardless of power or load side, reducing component count for modular vehicle builds.
Sustained Load Behaviour
Rated for 50 amps continuous at 600 volts, the connectors withstand 2200 volts DC and meet UL94 V0 flammability standards. Stainless steel springs maintain positive contact force under vibration while the polycarbonate housing operates from -20°C to 125°C. Silver-plated pins ensure stable conductivity during extended winching or inverter sessions without overheating.
How it compares
Measured against everything we stock in AC Plugs & USB Wall Chargers, at today’s prices. Recalculated every night.
- Price $7.99
- Cheaper than about 78% of the 547 comparable items (median $17.99).
Specifications
| Product | |
|---|---|
| Brand name | Unique Bargains |
| Power | |
| Battery type | Battery Converter |
Questions about this item
How long can the 50 A rating be sustained before the connector reaches its 125 °C limit?
The connector is rated for continuous operation up to 125 °C; sustained 50 A loads should be monitored so the housing temperature stays within the -20 °C to 125 °C range.
Does the polycarbonate housing or the silver-plated copper pins generate noticeable heat during all-day winch use at 50 A?
Silver-plated copper pins and stainless-steel springs minimise resistance, keeping heat rise low; the UL94 V0 polycarbonate housing withstands up to 125 °C without deformation.
What wire preparation and tools are needed before the 6 AWG conductors can be crimped into the 0.22" terminal pins?
You need 6 AWG cable (13.3 mm²), a crimper sized for the 0.22" pin barrel, heat-shrink or tape for insulation, and basic hand tools to strip and crimp each conductor.
More in AC Plugs & USB Wall Chargers
Similar items
2 Male + 2 Female 12 V 2.1x5.5mm DC Power Jack Plug Adapter Barrel Connector
- 2 Packs
- Adhesives; Enamels;…
Zojirushi CD-KD12-J straight blade plug
- UL Listed/CSA Certi…
- Adhesives; Enamels;…
Hubbell Incorporated 2-Gang Gray Aluminum Box 5 Outlets 1/2 In NPT 5337
- Gray
- Aluminum
Unique-Bargains IEC C14 straight blade plug 250V 10A pack of 5
- IEC Pin & Sleeve Pl…





