We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Clear PVC tubing coil, 3/8 inch ID, 1/2 inch OD, 50 ft length

Usa Sealing

Usa Sealing ZUSA-HT-2224 Clear PVC Tubing Trap 3/8" ID x 1/2" OD 50 ft

SKU CH-TN6M-9CMNK

Clear PVC tubing for beverage, food and water lines, 3/8 in. ID by 1/2 in. OD, 50 ft coil, rated to 20 psi and 140 °F

  • Product colorClear
  • Handles 20 psi working pressure for reliable beverage transfer
  • Withstands 140 °F maximum temperature for hot liquid use
  • NSF certified clear PVC meets food and dairy standards
  • 50 ft continuous length reduces joints in long runs
  • Shore A 65 hardness resists kinking on peristaltic pumps

Clear PVC Tubing for Beverage Use

This clear PVC tubing is made for beverage, dairy, food and water lines. It carries NSF certification for food contact and handles a maximum operating pressure of 20 psi at up to 140 Degrees F. The 50 ft coil provides a continuous run without splices. Shore A 65 hardness keeps it flexible for peristaltic pump use.

Who This Suits and Who It Does Not

It suits operators needing transparent, food-grade line for low-pressure dispensing or transfer. Buyers who need higher pressure ratings, larger diameters, or elevated temperature resistance should look at something else.

3/8 in ID x 1/2 in OD Dimensions

The 3/8 in inside diameter and 1/2 in outside diameter fix the flow capacity and fitting compatibility. Verify these dimensions match your barbs, clamps or pump heads before ordering.

How it compares

Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.

Price $30.99
Typical for this category: the median of 4,240 items is $31.99.

Specifications

Product
Brand nameZORO SELECT
Product colorClear

Questions about this item

What size barbed fittings are needed for the 3/8" ID tubing?

Use barbed fittings sized for a 3/8 inch inside diameter to match the tubing bore.

Can the 50 ft coil be cut to shorter lengths for a compact drain layout?

Yes, the clear PVC can be cut to any required length with a sharp knife or tube cutter.

How can I confirm the tubing is rated for 140 °F maximum temperature after installation?

Check the printed legend on the tubing wall for the 140 °F maximum operating temperature rating.

More in Drain Stoppers, Strainers & Traps

Similar items