We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten gold M12x1.5 extended wheel studs, 50mm long, knurled 14.22mm heads, grade 10.9

V-Project Inc

V-Project Inc Extended Wheel Studs M12x1.5 50mm Gold 10pcs

SKU CH-2TRE-MFDJD

M12×1.5 gold wheel studs, 50 mm thread length, grade 10.9, knurl 14.22 mm, 10 pieces for Toyota and Scion models 1991-2016

  • Commercial or home useResidential
  • Product colorGold
  • Gold finish adds corrosion resistance
  • 9 grade steel handles high clamping loads
  • 50mm thread length fits thick spacers or rotors
  • M12x1.5 threads match many Toyota and Scion hubs
  • 22mm knurl seats securely in factory hub bores

Extended M12x1.5 wheel studs for Toyota

These 50 mm long Grade 10.9 studs replace factory bolts on a wide range of Toyota and Scion vehicles from 1991 through 2016. The 14.22 mm knurl matches original hub dimensions for a secure press fit. They suit DIY owners upgrading to aftermarket wheels or adding spacers.

Thread engagement and fitment headroom

Each stud provides 50 mm of M12x1.5 thread length, giving extra engagement for thicker wheel centres or spacer stacks. The Grade 10.9 rating supports high clamping loads on front and rear hubs. Vehicles outside the listed model years or non-Toyota platforms will not match the knurl or thread specification.

Ten-piece set simplifies full-vehicle installation

The box contains ten studs, enough for all four corners on most applications with two spares. Gold finish aids visual inspection during torque checks. No nuts, washers or installation tools are included, so reuse existing hardware or source separately.

How it compares

Measured against everything we stock in Valve Stem Caps & Wheel Locks, at today’s prices. Recalculated every night.

Price $13.99
Pricier than about 68% of the 760 comparable items (median $7.99).

Specifications

Product
Brand namev-project
Product colorGold
More details
Commercial or home useResidential

Questions about this item

Will the M12x1.5 thread and 14.22 mm knurl fit the original hubs on my 2004 Toyota Solara V6 3.3?

Yes, the studs are built for Toyota Solara V6 3.3 models from 2004 to 2008 with M12x1.5 threads and a 14.22 mm knurl that matches the factory hub bore.

How can I confirm the 10.9 grade studs are seated correctly after installation?

After torquing to the vehicle specification, verify each stud sits flush with the hub face and the 50 mm thread length engages fully; a proper fit shows no protrusion or looseness when the wheel is mounted.

Does the 10-piece gold set include lug nuts or do I need to buy them separately?

The box contains only the ten extended wheel studs; lug nuts are not included and must be purchased separately.

More in Valve Stem Caps & Wheel Locks

Similar items