We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten gold wheel studs with knurled heads and threaded shafts

V-Project Inc

V-Project Inc Wheel Studs M12x1.25 50mm Gold 10pcs

SKU CH-MP52-18HCZ

Extended M12x1.25 wheel studs, 50 mm long with 14.3 mm knurl, grade 10.9, pack of 10

  • Commercial or home useResidential
  • Product colorGold
  • Grade 10.9 strength handles high clamping loads
  • 50 mm thread length suits spacer and rotor upgrades
  • 3 mm knurl matches factory hub bores
  • M12×1.25 thread fits wide Nissan, Infiniti, Subaru range
  • Gold finish resists corrosion during year-round driving

Extended Wheel Studs for Subaru Legacy

These M12 x 1.25 studs measure 50 mm in thread length and feature a 14.3 mm knurl head. The gold-finished grade 10.9 pin bolts come in a set of ten and fit Subaru Legacy Type BC, BD AWD and BL from 1990 to 2009 alongside a wide range of Nissan and Infiniti vehicles.

Installation Notes and Common Issues

Installation requires pressing the knurled section into the hub so the 14.3 mm diameter seats fully; a shop press or proper draw-through tool prevents the stud from spinning. Rust on the original hub holes often makes removal difficult, and cross-threading the 1.25 mm pitch threads is the most frequent error during reassembly.

Who Should Buy and Who Should Look Elsewhere

Builders replacing factory studs on the listed Subaru, Nissan or Infiniti models will find the correct thread and length here. Buyers needing a different thread pitch, a shorter or longer stud, or a larger knurl diameter for another hub pattern should look elsewhere.

How it compares

Measured against everything we stock in Valve Stem Caps & Wheel Locks, at today’s prices. Recalculated every night.

Price $13.99
Pricier than about 68% of the 760 comparable items (median $7.99).

Specifications

Product
Brand namev-project
Product colorGold
More details
Commercial or home useResidential

Questions about this item

How do I confirm the M12x1.25 wheel studs are correctly seated after installation?

Torque each stud to the vehicle manufacturer's specification; the 14.3 mm knurl should fully engage the hub flange with no visible gap, and the 50 mm thread length must allow full nut engagement on all ten pieces.

What comes in the package and what else is needed for a full wheel stud replacement?

The box contains ten gold-coloured grade 10.9 pin bolts measuring M12x1.25 by 50 mm with a 14.3 mm knurl; you must supply lug nuts matching the thread pitch and a suitable torque wrench.

Which stud length should I choose for a 1990-2009 Subaru Legacy BC/BD AWD or a 2003-2008 Infiniti G35?

The listed 50 mm thread length is the specific extended size produced for those Subaru Legacy and Infiniti G35 applications; no other length or capacity is offered in this kit.

More in Valve Stem Caps & Wheel Locks

Similar items