Kanto SUB8VMW 8-inch 300W Sealed Powered Subwoofer White home audio speaker
- Single
- 300 W Peak Power
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A water-resistant IP horn speaker delivering 108 dB output at 1.22 metres, powered over Ethernet with 10/100 Mbps connectivity
The Valcom VIP-480AL-W is a one-way IP horn designed for indoor or outdoor voice paging and alerting. It connects directly to a 10/100 Mbps Ethernet network and receives power through a PoE 802.3af link. Configuration uses manual or DHCP IP assignment with NTP time synchronisation.
The white enclosure carries an IP water-resistant rating and uses stainless steel hardware for durability in exposed locations. A single RJ-45 jack handles both data and power, reducing cabling to one Ethernet run. LED indicators on the housing show network activity and device status at a glance.
The 802.3af class caps available power, so output level is fixed at the rated 108 dB measured at 1.22 metres. Frequency response spans 400 Hz to 10 kHz with a signal-to-noise ratio of -70 dB, optimising intelligibility for speech rather than music reproduction. Buyers needing higher SPL, wider bandwidth or stereo playback should consider other solutions.
Measured against everything we stock in Home Speakers & Subwoofers, at today’s prices. Recalculated every night.
| Product | |
|---|---|
| Brand name | Valcom |
| Model name | VIP-480AL-W |
| Audio & video | |
| Frequency range | 400 Hz - 10 kHz |
| Ports & slots | |
| Connection types | NETWORK: 10/100 Mbit/s Ethernet Manual or Dynamic Host Configuration Protocol (DHCP) IP address assignment. Time and date synchronization using NTP AUDIO OUTPUT: Rating: 108 dB @ 4 ft (1.22m) Signal/noise ratio: -70 dB AUDIO CODECS: G.711 u-law, others |
| Power | |
| Power supply | Power over Ethernet (POE) 802.3af compatible |
| Size & build | |
| Size and weight | 6.8 in H × 8.3 in W × 3.3 in D 2.1 lb |
| Shipping weight | 2.27 kg |
| Package size | 305 × 279 × 229 mm |
The 10/100 Mbps Ethernet port caps network throughput at 100 Mbps, which is ample for the G.711 u-law codec and other supported audio codecs used by this IP horn.
The horn measures 6.80 inches high, 8.30 inches wide and 3.30 inches deep, weighs 2.10 lbs, and includes stainless steel hardware for flexible indoor or outdoor mounting.
Connect the RJ-45 jack to an 802.3af PoE switch; the unit receives power and a DHCP address automatically, but the NTP time sync must be reachable or the clock will drift.
More in Home Speakers & Subwoofers
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?