We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green warning light with dome lens and ABS housing

Value Brand

Value Brand warning light, strobe tube, green, 120V AC

SKU CH-YSQ2-N44BX

Green strobe warning light operates on 120V AC, flashes 72 times per minute, and draws 0.08A

  • Product colorGreen
  • High-visibility green strobe for clear signalling
  • 72 flashes per minute grabs attention fast
  • 150000 candela output cuts through ambient light
  • 120V AC operation suits standard facility wiring
  • NEMA 4X rating resists dust and water ingress

Green strobe warning light for facility safety

This Value Brand warning light uses a green strobe tube operating at 120V AC. It is built for facility and traffic safety applications where a high-visibility flashing signal is required. The NEMA 4X-rated housing suits indoor or outdoor mounting.

Thermals noise and power in normal use

The unit draws 0.08A AC and operates across a temperature range of -31 to 150 degrees F. With no moving parts the strobe tube runs silently. The ABS housing and polycarbonate dome lens are rated for the full operating span without active cooling.

Flash rate and output define suitability

The light flashes at 72 flashes per minute with a peak output of 150 candela. Buyers who need a different flash frequency or a higher intensity signal should select another model.

How it compares

Measured against everything we stock in Traffic Cones, Signs & Safety Gear, at today’s prices. Recalculated every night.

Price $45.99
Cheaper than about 58% of the 1,503 comparable items (median $61.99).

Specifications

Product
Brand nameZORO SELECT
Product colorGreen

Questions about this item

How do I mount the 1/2 in NPT base, and what step do installers often miss?

Thread the fixture onto a 1/2 in NPT conduit or pipe fitting, then tighten with a wrench on the housing flats — the step often missed is applying PTFE tape or pipe sealant to the threads so the NEMA 4X seal stays watertight.

Which part will need replacement first, and how long does it last?

The strobe tube is the only replaceable component; it is rated for 8,000 hours of operation before light output drops below useful levels.

What limits continuous operation in a hot enclosure?

The unit is rated to 150 °F ambient; sustained temperatures above that will cause the strobe tube and ABS housing to degrade faster than the 8,000-hour lamp life.

More in Traffic Cones, Signs & Safety Gear

Similar items