We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Vertiv PD5001 power distribution unit with six output receptacles and L14-30P input plug

Vertiv

Vertiv PD5001 POD 4×5-15/20R 1×L14-30R 1×L6-30R UPS

SKU CH-CG58-N4YB3 MPN PD5001

A maintenance-bypass power distribution unit with four NEMA 5-15/20R, one L14-30R and one L6-30R output receptacles for GXT5 5-10kVA UPS models

  • Maintenance bypass keeps loads powered during UPS service
  • Automatic transfer protects equipment if UPS fails
  • Plug-and-play design replaces existing POD without rewiring
  • Six output receptacles support varied equipment connections
  • Compatible with GXT5 5-10kVA UPS models

Power output distribution for GXT5 UPS

The Vertiv PD5001 is a power output distribution unit designed for GXT5 5-10kVA uninterruptible power supply models. It provides a maintenance bypass that allows UPS servicing or replacement without interrupting power to connected equipment. The unit automatically transfers the load to the utility source during a UPS failure. It is intended for IT managers and facility operators who require continuous uptime for critical systems.

Passive operation with automatic transfer

As a passive distribution and bypass module, the PD5001 generates no audible noise and draws negligible power during normal operation. Thermal output is minimal because the unit simply routes current through its internal switch and connectors. It requires no active cooling and adds no measurable heat load to the rack or room environment. Reliability depends on the quality of the upstream UPS and utility feed.

Replaces the factory POD on GXT5 units

This module replaces the original POD box mounted on the rear of compatible GXT5 UPS models. The upgrade is worth it when the existing distribution lacks the required NEMA 5-15/20R, L14-30R or L6-30R output mix or when a maintenance bypass is absent. It is not suitable for non-GXT5 UPS models, for installations that need different output connectors, or for users who require network management features not present on this hardware.

How it compares

Measured against everything we stock in Uninterruptible Power Supplies (UPS), at today’s prices. Recalculated every night.

Price $471.99
Cheaper than about 67% of the 1,153 comparable items (median $948.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Size & build
Shipping weight6.35 kg
Package size572 × 241 × 210 mm

Questions about this item

How do I install the PD5001 POD onto a GXT5 UPS and what step is often missed?

Slide the unit into the UPS rear bay, secure the mounting screws, then plug the L14-30P input into the UPS output receptacle; the step often missed is tightening the captive screws on the input plug to prevent it from vibrating loose.

What maintenance will the PD5001 need over time?

Periodically inspect the six output receptacles — four 5-15/20R, one L14-30R, one L6-30R — and the L14-30P inlet for discolouration or loose contacts; no internal batteries or filters require replacement.

What is the first limit reached when the PD5001 runs at full load continuously?

The 30 A rating of the L14-30P input and L14-30R/L6-30R outputs is the first hard limit; exceeding it will trip the upstream breaker before any thermal issue appears in the unit itself.

More in Uninterruptible Power Supplies (UPS)

Similar items