We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red H-frame shop press on floor, pneumatic pump attached, adjustable work table, pressure gauge mounted

VEVOR

VEVOR 20 T H-Frame Pneumatic Shop Press with Press Plate

SKU CH-63A2-WFA33

A 20-tonne pneumatic-hydraulic floor press with a 9-position adjustable table from 65 to 1030 mm and a 145 mm cylinder stroke for bending, straightening and pressing automotive components

  • 20-ton capacity handles bushings, ball joints and U-joints with ease
  • pneumatic assist pump connects to an air compressor for lower-effort operation
  • adjustable worktable offers nine height positions from 2.6 to 40.5 inches
  • 5-inch cylinder stroke provides extended pressing range for bending and straightening
  • triangular support frame adds rigidity during heavy-duty stamping tasks

20 Ton Hydraulic Pneumatic Press

This 20 ton H-frame shop press combines hydraulic force with pneumatic pump assist for bending, straightening and stamping metal parts. It suits professional workshops and DIY enthusiasts who need strong, repeatable pressure for automotive bushing, ball joint and U-joint work. The triangular support frame adds stability during heavy-duty tasks.

5.7 Inch Cylinder Stroke Decides Fit

The cylinder stroke is 5.7 inches (145 mm) and the manufacturer warns that exceeding this range may damage the cylinder seals. This single dimension determines whether a workpiece can be pressed in one motion or requires repositioning.

9 Height Settings From 2.6 to 40.5 Inches

The worktable adjusts through nine pin positions between 2.6 and 40.5 inches (65 to 1030 mm) to match part height and operator reach. It comfortably handles medium-height assemblies, while very tall or very short pieces fall outside the adjustment range.

How it compares

Measured against everything we stock in Brake Service Tools & Presses, at today’s prices. Recalculated every night.

Price $436.99
Pricier than about 92% of the 1,702 comparable items (median $86.99).

Specifications

No published specifications for this item yet.

Questions about this item

How does the 20-ton rating translate to actual pressing force on the work piece?

The 20-ton rating is the maximum force the hydraulic cylinder can generate at the rated pump pressure of 0.8 to 1.2 MPa, delivering up to 20 tons of compressive force directly onto the part placed on the worktable.

What air supply pressure does the pneumatic pump need, and what hydraulic pressure does that produce?

The pneumatic assist pump connects to an air compressor via the supplied quick-connect hose and drives the hydraulic system to an operating pressure of 0.8 to 1.2 MPa.

What floor space and ceiling clearance does the assembled H-frame require?

The assembled press measures 30.2 inches wide, 23.6 inches deep and 69.8 inches high, so allow at least that footprint plus working room around the frame.

More in Brake Service Tools & Presses

Similar items