VEVOR 3/4" D-Ring Shackle 2 Pack Orange
Two alloy-steel D-ring shackles rated at 9 500 lbs working load with 7/8" screw pins, isolators and washers for off-road recovery
- Overall width5.91
- Supports heavy recovery with 62832 lbs break strength
- Rated for 9500 lbs working load limit
- Alloy steel body and 40Cr pin resist wear
- Includes two shackles with isolators and washers
- Compact 0.75 in wire diameter fits tight mounts
Two-Pack Recovery Shackles
This two-pack supplies a pair of 3/4 inch D-ring shackles built for off-road vehicle recovery. Each unit is forged from #45 steel with a 40Cr steel screw pin and finished in high-visibility orange. Isolators and washers are included to reduce metal-on-metal noise during transport. The set suits Jeep and truck owners who need reliable anchor points for winch lines or tow straps.
Sustained Load Behaviour
The working load limit is rated at 9500 lbs, which defines the maximum force the shackles can handle continuously during a recovery pull. The 28.5 ton breaking strength provides a wide safety margin above that limit. Pin threads are cut to 7/8 inch diameter using 40Cr steel to resist deformation when the load is held for extended periods. The alloy construction maintains integrity through repeated tension cycles.
Decisive Specification
The 2.05 inch inner diameter determines which recovery straps, hooks or thimbles will pass through the bow without binding. A 0.75 inch wire diameter and 51 mm internal clearance match standard 3/4 inch recovery hardware. If your existing gear requires a larger or smaller aperture, these shackles will not connect properly.
How it compares
Measured against everything we stock in Winches & Towing Accessories, at today’s prices. Recalculated every night.
- Price $17.99
- Cheaper than about 63% of the 27 comparable items (median $35.99).
Specifications
No published specifications for this item yet.
Questions about this item
Does the 0.75 in wire diameter create extra heat or noise when the shackle is under constant load all day?
The shackle is a solid alloy steel link with no moving parts, so it produces no noise or heat during continuous use.
What recovery gear must I already have for the 7/8 in screw pin to work?
You need a tow strap, snatch block or winch line with a loop or thimble that fits the 2.05 in inner diameter so the pin can pass through.
Will the #45 steel D-ring and 40Cr steel pin wear differently if I keep using my older Grade 8 recovery bolts?
Both steels are hardened for heavy duty recovery; the shackle meets a 9500 lbs work load limit and 62832 lbs break strength regardless of the bolt grade used alongside it.
More in Winches & Towing Accessories





